Chapter 296-806 - Machine safety

  1. § 296-806-099 - Definitions
  2. § 296-806-100 - Scope
  3. § 296-806-200 - Requirements for all machines
  4. § 296-806-20002 - Secure machines designed to stay in one place
  5. § 296-806-20004 - Protect employees from slipping hazards around machinery
  6. § 296-806-20006 - Arrange work areas to avoid creating hazards
  7. § 296-806-20007 - Machine controls and operations
  8. § 296-806-20008 - Make sure operating controls meet these requirements
  9. § 296-806-20010 - Protect employees from unintentional machine operation
  10. § 296-806-20012 - Make sure emergency stop controls meet these requirements
  11. § 296-806-20014 - Control machine vibration
  12. § 296-806-20016 - Prevent overspeed conditions
  13. § 296-806-20018 - Make sure hand feeding and retrieval tools meet these requirements
  14. § 296-806-20020 - Protect employees who are adjusting or repairing machinery
  15. § 296-806-20021 - Power transmission parts
  16. § 296-806-20022 - Keep power transmission equipment in good working condition
  17. § 296-806-20024 - Inspect power transmission parts
  18. § 296-806-20026 - Protect employees lubricating moving machinery
  19. § 296-806-20027 - Safeguarding requirements
  20. § 296-806-20028 - Safeguard employees from the point of operation
  21. § 296-806-20030 - Safeguard employees from nip or shear point hazards
  22. § 296-806-20032 - Safeguard employees from rotating or revolving parts
  23. § 296-806-20034 - Safeguard employees from reciprocating or other moving parts
  24. § 296-806-20036 - Safeguard employees from flying objects
  25. § 296-806-20038 - Safeguard employees from falling objects
  26. § 296-806-20040 - Safeguard employees from moving surfaces with hazards
  27. § 296-806-20041 - Safeguarding methods
  28. § 296-806-20042 - Make sure guards meet these requirements
  29. § 296-806-20043 - Devices
  30. § 296-806-20044 - Make sure devices meet these requirements
  31. § 296-806-20046 - Make sure light curtains meet these requirements
  32. § 296-806-20048 - Make sure pressure-sensitive mats meet these requirements
  33. § 296-806-20050 - Make sure restraint or pullback devices meet these requirements
  34. § 296-806-20052 - Make sure two-hand devices meet these requirements
  35. § 296-806-20054 - Make sure devices used with barrier guards meet these requirements
  36. § 296-806-20055 - Distance
  37. § 296-806-20056 - Make sure safeguarding by distance meets these requirements
  38. § 296-806-20058 - Make sure guardrails used for safeguarding meet these requirements
  39. § 296-806-300 - Requirements for specific machine hazards
  40. § 296-806-30002 - Fit arbors and mandrels to the machine
  41. § 296-806-30004 - Safeguard belt and rope drives
  42. § 296-806-30006 - Make sure belt or rope drives meet these requirements
  43. § 296-806-30008 - Protect employees while shifting belts on belt and pulley drives
  44. § 296-806-30010 - Make sure belt tighteners meet these requirements
  45. § 296-806-30012 - Safeguard cams, connecting rods, tail rods, and extension piston rods
  46. § 296-806-30014 - Safeguard chain and sprocket drives
  47. § 296-806-30016 - Safeguard fan blades
  48. § 296-806-30017 - Flywheels
  49. § 296-806-30018 - Safeguard flywheels
  50. § 296-806-30020 - Safeguard gears
  51. § 296-806-30022 - Safeguard projections on moving parts
  52. § 296-806-30024 - Safeguard pulleys
  53. § 296-806-30026 - Make sure pulleys meet these requirements
  54. § 296-806-30028 - Safeguard revolving drums, barrels, and containers
  55. § 296-806-30030 - Safeguard shafting
  56. § 296-806-30032 - Make sure shafting meets these requirements
  57. § 296-806-30034 - Safeguard unused keyways
  58. § 296-806-30036 - Make sure revolving collars meet these requirements
  59. § 296-806-30038 - Safeguard counterweights
  60. § 296-806-400 - Additional requirements for some machines and machine operations
  61. § 296-806-405 - Abrasive wheels
  62. § 296-806-40502 - Make sure abrasive wheels and machines are properly designed and constructed
  63. § 296-806-40504 - Make sure machines have safety guards
  64. § 296-806-40506 - Make sure safety guards meet specific requirements
  65. § 296-806-40508 - Provide a tongue guard on bench, pedestal, floorstand, and cylindrical grinders
  66. § 296-806-40510 - Use a work rest for off-hand grinding
  67. § 296-806-40511 - Mounting abrasive wheels
  68. § 296-806-40512 - Make sure abrasive wheels are safe to use
  69. § 296-806-40514 - Mount wheels properly
  70. § 296-806-40516 - Use proper flanges
  71. § 296-806-40518 - Make sure flanges are in good condition
  72. § 296-806-40520 - Use specific flanges for Type 1 cutting-off wheels
  73. § 296-806-40522 - Use specific flanges for Type 27A cutting-off wheels
  74. § 296-806-40524 - Use blotters when required
  75. § 296-806-40526 - Meet specific blotter requirements when using modified Types 6 and 11 wheels (terrazzo)
  76. § 296-806-410 - Calender
  77. § 296-806-41002 - Provide calender safety controls
  78. § 296-806-41004 - Follow these stopping limit requirements for calenders
  79. § 296-806-415 - Compactors
  80. § 296-806-41502 - Safeguard hazardous moving parts of stationary compactors
  81. § 296-806-41504 - Follow these requirements for compactor controls
  82. § 296-806-41506 - Follow these requirements for compactor access doors and covers
  83. § 296-806-41508 - Follow these requirements for compactors that cycle automatically
  84. § 296-806-420 - Conveyors
  85. § 296-806-42002 - Follow these requirements for conveyors
  86. § 296-806-42004 - Provide emergency stops on conveyors
  87. § 296-806-42006 - Label conveyor controls
  88. § 296-806-42008 - Prohibit riding on conveyors
  89. § 296-806-42010 - Provide safe access to conveyors
  90. § 296-806-42012 - Provide backstop or antirunaway devices on incline, decline, or vertical conveyors
  91. § 296-806-42014 - Make only safe alterations to conveyors
  92. § 296-806-42016 - Inspect and replace worn conveyor parts
  93. § 296-806-42018 - Follow these requirements for replacing conveyor parts
  94. § 296-806-42020 - Follow these requirements for spill guards
  95. § 296-806-42022 - Provide pedestrian overpasses for conveyors
  96. § 296-806-42024 - Guard openings to hoppers and chutes
  97. § 296-806-42026 - Install guideposts
  98. § 296-806-42027 - Belt conveyors
  99. § 296-806-42028 - Guard nip points on belt conveyors
  100. § 296-806-42030 - Install emergency stop controllers on overland belt conveyors
  101. § 296-806-42032 - Install belt conveyor overpasses
  102. § 296-806-42033 - Chain converyors
  103. § 296-806-42034 - Safeguard chain conveyors
  104. § 296-806-42036 - Guard return strands on chain conveyors
  105. § 296-806-42038 - Guard chain conveyors that are used as a transfer mechanism
  106. § 296-806-42039 - Elevator conveyors
  107. § 296-806-42040 - Prevent material from falling off of elevator conveyors
  108. § 296-806-42041 - Inclined reciprocating conveyors (shakers)
  109. § 296-806-42042 - Provide protection where employees must load shakers
  110. § 296-806-42044 - Provide grating over silo and bunker openings for shuttle conveyors
  111. § 296-806-42045 - Mobile conveyors
  112. § 296-806-42046 - Guard wheels and rails on mobile conveyors
  113. § 296-806-42048 - Prevent hazardous motion on mobile conveyors
  114. § 296-806-42050 - Provide a detector for mobile conveyors
  115. § 296-806-42052 - Provide safe access on mobile conveyors
  116. § 296-806-42053 - Push-bar conveyors
  117. § 296-806-42054 - Guard pusher-bar conveyors
  118. § 296-806-42055 - Roller conveyors
  119. § 296-806-42056 - Prohibit walking on roller-type conveyors
  120. § 296-806-42058 - Use speed controls for roller and wheel conveyors
  121. § 296-806-42060 - Safeguard belt-driven live roller conveyors
  122. § 296-806-42061 - Screw conveyors
  123. § 296-806-42062 - Guard screw conveyors
  124. § 296-806-42063 - Skip hoists
  125. § 296-806-42064 - Provide slack-cable switches on hoists
  126. § 296-806-42066 - Block the skip bucket and counterweight guides
  127. § 296-806-42068 - Protect against wire rope coming off sheaves
  128. § 296-806-42069 - Slat and roller-slat conveyors
  129. § 296-806-42070 - Safeguard slat and roller-slat conveyors
  130. § 296-806-42071 - Towed conveyors
  131. § 296-806-42072 - Provide a safe method for disengaging the tow pin
  132. § 296-806-42074 - Protect employees from moving carts on towed conveyors
  133. § 296-806-42076 - Provide clearances and warnings for carts on towed conveyors
  134. § 296-806-42078 - Mark projections above the floor
  135. § 296-806-425 - Food processing equipment
  136. § 296-806-42502 - Provide locks on chamber doors of large air conditioning units
  137. § 296-806-42504 - Use proper door locks on rack-type bread coolers
  138. § 296-806-42506 - Provide see-through panels on fermentation room doors
  139. § 296-806-42508 - Cover exposed hot pipes
  140. § 296-806-42510 - Provide extension piping on stationary lubrication fittings
  141. § 296-806-42512 - Provide hoods for pan-washing tanks
  142. § 296-806-42514 - Safeguard proof boxes
  143. § 296-806-42516 - Safeguard storage bins
  144. § 296-806-42517 - Material handling
  145. § 296-806-42518 - Follow these design requirements for bag lifts (bag arm elevators) and chutes
  146. § 296-806-42520 - Follow these requirements for chain tackle
  147. § 296-806-42522 - Safeguard conveyors
  148. § 296-806-42524 - Use properly designed covers for screw conveyors (augers)
  149. § 296-806-42526 - Safeguard pallet jacks and hand trucks
  150. § 296-806-42527 - Specific food processing equipment
  151. § 296-806-42528 - Safeguard bakery slicers
  152. § 296-806-42530 - Safeguard bakery wrapping machines
  153. § 296-806-42532 - Provide troughs with antifriction-bearing casters
  154. § 296-806-42534 - Follow these requirements for trough hoists and similar equipment
  155. § 296-806-42536 - Follow these requirements for dividers
  156. § 296-806-42538 - Safeguard manually-fed dough and cross-roll brakes
  157. § 296-806-42540 - Provide a guard or tripping device on reversible dough brakes
  158. § 296-806-42542 - Follow these requirements for doughnut machines
  159. § 296-806-42544 - Follow these requirements for dumpbins and blenders
  160. § 296-806-42546 - Follow these requirements for flour-handling machines
  161. § 296-806-42548 - Follow these requirements for traveling or track-type flour scales
  162. § 296-806-42550 - Follow these requirements for food grinders and cutters
  163. § 296-806-42552 - Provide covers with interlocks on ingredient premixers, emulsifiers, and similar machines
  164. § 296-806-42554 - Follow these requirements for open fat kettles
  165. § 296-806-42556 - Follow these requirements for steam kettles
  166. § 296-806-42558 - Follow these requirements for chocolate melting, refining, and mixing kettles
  167. § 296-806-42560 - Safeguard meat-processing equipment (circular meat-cutting saws)
  168. § 296-806-42562 - Follow these requirements for horizontal dough mixers
  169. § 296-806-42564 - Follow these requirements for vertical mixers
  170. § 296-806-42566 - Follow these requirements for mechanical-feed moulders
  171. § 296-806-42568 - Follow these requirements for hand-fed moulders
  172. § 296-806-42570 - Design, install, and construct your ovens according to these requirements
  173. § 296-806-42572 - Properly locate emergency "stop" buttons and main shut off valves for ovens
  174. § 296-806-42574 - Inspect and test safety devices on ovens
  175. § 296-806-42576 - Follow these requirements for peanut-cooling trucks
  176. § 296-806-42578 - Follow these requirements for pretzel-rolling, pretzel stick extruding, rotary, and die machines
  177. § 296-806-42580 - Safeguard box and roll-type dough sheeters
  178. § 296-806-42582 - Provide proper enclosures for sifters
  179. § 296-806-42584 - Follow these requirements for sugar and spice pulverizers
  180. § 296-806-430 - Forging machines
  181. § 296-806-43002 - Follow these safety requirements when using lead and lead casts
  182. § 296-806-43004 - Properly inspect and maintain forging equipment
  183. § 296-806-43006 - Use safety blocks on hammers and presses
  184. § 296-806-43008 - Make sure tongs meet these requirements
  185. § 296-806-43010 - Protect employees when removing scale
  186. § 296-806-43012 - Provide adequate foundations for hammers and presses
  187. § 296-806-43014 - Follow these requirements for manually operated valves and switches
  188. § 296-806-43015 - Hammers
  189. § 296-806-43016 - Use die keys and shims made of proper-grade material
  190. § 296-806-43018 - Provide a safety cylinder head
  191. § 296-806-43020 - Provide a shutoff valve
  192. § 296-806-43022 - Provide a means for cylinder draining
  193. § 296-806-43024 - Follow these requirements for pressure pipes
  194. § 296-806-43026 - Follow these requirements when using board hammers
  195. § 296-806-43027 - Other forge facility equipment
  196. § 296-806-43028 - Protect against sparks from saws
  197. § 296-806-435 - Garbage waste disposals
  198. § 296-806-43502 - Safeguard garbage (waste) disposal equipment
  199. § 296-806-440 - Glue spreaders
  200. § 296-806-44002 - Provide guards and automatic shutoffs on glue spreaders
  201. § 296-806-445 - Ironworkers
  202. § 296-806-44502 - Safeguard ironworkers point of operation
  203. § 296-806-44504 - Follow these requirements for adjustable restrictors when safeguarding ironworkers
  204. § 296-806-450 - Lathes
  205. § 296-806-45002 - Provide shields or guards on metal lathes for chip or coolant hazards
  206. § 296-806-45004 - Safeguard work-holding devices (chucks)
  207. § 296-806-45006 - Follow these requirements for chip control and handling
  208. § 296-806-45008 - Safeguard power-clamping devices
  209. § 296-806-45010 - Restrain extended workpieces on horizontal lathes
  210. § 296-806-45011 - Woodworking lathes
  211. § 296-806-45012 - Guard cutting heads on profile lathes and swing-head lathes
  212. § 296-806-45014 - Guard cutting heads on turning lathes
  213. § 296-806-45016 - Guard automatic turning lathes
  214. § 296-806-45018 - Guard wood lathes used for turning long pieces of stock
  215. § 296-806-455 - Mechanical power presses
  216. § 296-806-45502 - Make sure mechanical power presses are properly designed and constructed
  217. § 296-806-45503 - Safeguarding
  218. § 296-806-45504 - Safeguard presses that use unitized tooling
  219. § 296-806-45506 - Protect operators from guidepost hazards
  220. § 296-806-45508 - Safeguard the point of operation
  221. § 296-806-45510 - Make sure point-of-operation guards are properly designed and constructed
  222. § 296-806-45512 - Make sure barrier guards meet these requirements
  223. § 296-806-45514 - Make sure point-of-operation devices are effective
  224. § 296-806-45516 - Make sure presence-sensing devices used to safeguard the point of operation meet these requirements
  225. § 296-806-45518 - Make sure pull-back devices used to safeguard the point of operation meet these requirements
  226. § 296-806-45520 - Make sure restraint (holdout) devices used to safeguard the point of operation meet these requirements
  227. § 296-806-45522 - Make sure two-hand control devices used to safeguard the point of operation meet these requirements
  228. § 296-806-45524 - Make sure two-hand trip devices used to safeguard the point of operation meet these requirements
  229. § 296-806-45526 - Provide additional safeguards when the operator puts one or both hands into the point of operation
  230. § 296-806-45527 - Operations
  231. § 296-806-45528 - Establish die setting procedures
  232. § 296-806-45530 - Handle dies safely
  233. § 296-806-45532 - Protect die setters during setup and tryout
  234. § 296-806-45534 - Train press operators
  235. § 296-806-45536 - Operate mechanical power presses safely
  236. § 296-806-45538 - Provide tools and other means to protect press operators
  237. § 296-806-45540 - Inspect and maintain presses
  238. § 296-806-45542 - Make sure presses and operating practices used in the PSDI (presence sensing device initiation) mode of operation meet these requirements
  239. § 296-806-460 - Mills
  240. § 296-806-46002 - Meet height requirements for mill rolls
  241. § 296-806-46004 - Provide mill safety controls
  242. § 296-806-46006 - Follow these stopping limit requirements for mills
  243. § 296-806-465 - Press brakes Summary
  244. § 296-806-46502 - Provide auxiliary safety aids on press brakes
  245. § 296-806-46504 - Safeguard the point of operation on press brakes
  246. § 296-806-46505 - Safe distance safeguarding
  247. § 296-806-46506 - Follow this requirement when using safe distance safeguarding
  248. § 296-806-46508 - Develop a safe distance safeguarding program for press brakes
  249. § 296-806-46510 - Follow these requirements for safe distance training for press brakes
  250. § 296-806-46512 - Require safe distance retraining for press brake operations
  251. § 296-806-46514 - Conduct periodic safe distance inspections on press brakes
  252. § 296-806-46516 - Supervise the safe distance program for press brakes
  253. § 296-806-470 - Roll-forming and bending machines
  254. § 296-806-47002 - Follow these requirements for machine initiation
  255. § 296-806-47004 - Safeguard nip points of roll-forming and bending machines
  256. § 296-806-475 - Sanding machines
  257. § 296-806-47502 - Guard drum sanders
  258. § 296-806-47504 - Guard disk sanders
  259. § 296-806-47506 - Guard belt sanders
  260. § 296-806-47508 - Follow these requirements for feed roll guarding
  261. § 296-806-480 - Saws and cutting heads
  262. § 296-806-48001 - General requirements for all saws and cutting heads
  263. § 296-806-48002 - Protect employees using saws and cutting heads
  264. § 296-806-48004 - Make sure saws and cutting heads are sharpened and tensioned by qualified people
  265. § 296-806-48005 - General requirements for all saws
  266. § 296-806-48006 - Make sure saws are safe to use
  267. § 296-806-48007 - Requirements for all circular saws
  268. § 296-806-48008 - Make sure all circular saws meet these requirements
  269. § 296-806-48010 - Make sure circular saw gages meet these requirements
  270. § 296-806-48012 - Safeguard hand-fed circular table saws
  271. § 296-806-48014 - Provide kickback protection for employees using hand-fed circular table ripsaws when ripping wood products
  272. § 296-806-48016 - Safeguard self-feed circular saws
  273. § 296-806-48018 - Provide kickback protection for self-feed circular ripsaws when ripping wood products
  274. § 296-806-48020 - Guard circular resaws
  275. § 296-806-48022 - Provide spreaders for circular resaws
  276. § 296-806-48023 - Requirements for specific circular saws
  277. § 296-806-48024 - Protect employees from automatic saw hazards
  278. § 296-806-48026 - Guard inverted swing (jump) saws
  279. § 296-806-48028 - Guard miter saws
  280. § 296-806-48030 - Guard radial saws
  281. § 296-806-48032 - Limit the travel of radial saws
  282. § 296-806-48034 - Provide kickback protection for radial saws used for ripping wood products
  283. § 296-806-48036 - Guard revolving double arbor saws
  284. § 296-806-48038 - Guard swing saws
  285. § 296-806-48040 - Limit the travel of swing saws
  286. § 296-806-48041 - Requirements for band saws and drag saws
  287. § 296-806-48042 - Make sure band saws meet these requirements
  288. § 296-806-48044 - Protect employees from drag saw hazards
  289. § 296-806-48045 - General requirements for all cutting heads
  290. § 296-806-48046 - Maintain and balance knives and cutting heads
  291. § 296-806-48047 - Boring and mortising machines
  292. § 296-806-48048 - Make sure boring and mortising machines meet these requirements
  293. § 296-806-48049 - Chipper and hog mills
  294. § 296-806-48050 - Follow these requirements for chipper mills
  295. § 296-806-48052 - Follow these requirements for hog mills
  296. § 296-806-48054 - Protect employees from falling into chipper and hog mills
  297. § 296-806-48055 - Jointers
  298. § 296-806-48056 - Make sure jointers with horizontal cutting heads meet these requirements
  299. § 296-806-48058 - Guard horizontal cutting heads on hand-fed jointers
  300. § 296-806-48060 - Guard vertical cutting heads on jointers
  301. § 296-806-48061 - Molding, sticking and matching machines
  302. § 296-806-48062 - Make sure molding, sticking and matching machines meet these requirements
  303. § 296-806-48063 - Panel raisers and other similar machines
  304. § 296-806-48064 - Guard hand-fed panel raisers and other similar machines
  305. § 296-806-48065 - Planers
  306. § 296-806-48066 - Make sure planers with a horizontal cutting head meet these requirements
  307. § 296-806-48068 - Guard planers
  308. § 296-806-48070 - Guard planer feed rolls
  309. § 296-806-48072 - Provide kickback protection on planers running stock of varied thicknesses
  310. § 296-806-48073 - Shapers
  311. § 296-806-48074 - Make sure shapers meet these requirements
  312. § 296-806-48075 - Tenoning machines
  313. § 296-806-48076 - Guard tenoning machine feed chains and sprockets
  314. § 296-806-48078 - Guard tenoning machines
  315. § 296-806-48079 - Veneer machines
  316. § 296-806-48080 - Guard veneer cutters and wringer knives
  317. § 296-806-48082 - Guard veneer clippers
  318. § 296-806-48084 - Follow these requirements for guarding guillotine cutters
  319. § 296-806-48086 - Provide mechanisms to stop power-driven guillotine cutters
  320. § 296-806-48088 - Prohibit riders on veneer slicer carriages
  321. § 296-806-485 - Sewing machines
  322. § 296-806-48502 - Guard sewing machine needles
  323. § 296-806-500 - Definitions (Repealed)

State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.

No prior version found.