Wash. Admin. Code § 296-806-48056 - Make sure jointers with horizontal cutting heads meet these requirements
(1) You
must make sure the cutting head on hand-fed jointers is cylindrical:
(2) You must install and adjust the knife
blade so it does not protrude more than one-eighth inch beyond the body of the
head.
(3) You must make sure the
opening in the table meets all of the following:
(a) Is kept as small as possible.
(b) The clearance between the edge of the
rear table and the cutting head is not more than one-eighth inch.
(c) The table throat opening is not more than
two and one-half inches when the tables are set or aligned with each other for
zero cut.
Notes
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-48056, filed 6/29/04, effective 1/1/05.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.