Wash. Admin. Code § 296-806-48074 - Make sure shapers meet these requirements
(1) You must guard the cutting head of the
shaper by enclosing it with either:
(a) A
fixed guard, such as a cage; or
(b)
An adjustable guard designed to keep the operator's hand away from the cutting
edge.
(2) You must make
sure the diameter of a circular shaper guard is at least as large as the
greatest diameter of the cutter.
Note: A warning device of leather or other material attached to the spindle is NOT an acceptable substitute for a guard.
(3) You must
guard all sections of the cutting tool except for an opening to allow access to
the work piece by the cutting tool.
| Note: | A ring guard is one means of satisfying the guarding requirement for cutting tools when involved in free hand or template shaping. |
(4)
You must make sure all double-spindle shapers have a spindle starting and
stopping device for each spindle.
Notes
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-48074, filed 6/29/04, effective 1/1/05.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.