Wis. Admin. Code Department of Transportation Trans 300.46 - Fuel tank and fuel system integrity
(1) All fuel
systems and tanks must be maintained free of leaks. The fuel tank shall be
attached to the bus in a manner that prevents any movement of the tank while
the bus is in motion.
(2) All fuel
lines shall be secured in a manner that will prevent wear.
(3) The filler pipe or device shall be
located so that the fuel, if spilled or overfilled, will not drip or drain on
any part of the exhaust system.
(4)
Every fuel system shall be properly vented to prevent any accumulation of
fumes.
(5) The fuel systems and
tanks shall meet FMVSS 301, fuel system integrity, and all other federal and
state standards and regulations applicable for the type of fuel used at the
time of manufacture.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.