40 CFR Appendix Table 11 to Subpart WWWW of Part 63, Data Requirements for New and Existing Continuous Lamination and Continuous Casting Lines Complying With a Percent Reduction Limit or a Lbs/Ton Limit on an Averaging Basis
As required in § 63.5865, in order to comply with a percent reduction limit or a lbs/ton limit on an averaging basis for continuous lamination lines and continuous casting lines you must determine the data in the following table:
|For each . . .||That . . .||You must determine . . .|
|1. Wet-out area||Is uncontrolled||Annual uncontrolled wet-out area organic HAP emissions.|
|2. Wet-out area||a. Has an enclosure that is not a PTE||i. The capture efficiency of the enclosure, and
ii. Annual organic HAP emissions that escape the enclosure.
|3. Wet-out area||Has an enclosure that is a PTE||That the enclosure meets the requirements of EPA Method 204 of appendix M to
|4. Oven||Is uncontrolled||Annual uncontrolled oven organic HAP emissions.|
|5. Line||a. Is controlled or uncontrolled||i. The amount of neat resin plus applied, and
ii. The amount of neat gel coat plus applied.
|6. Add-on control device||i. Total annual inlet organic HAP emissions, and total annual outlet organic HAP emissions.|