49 CFR Subpart J - Specifications for Containers for Motor Vehicle Transportation

  1. § 178.318 Specification MC 201; container for detonators and percussion caps.
  2. § 178.318-1 Scope.
  3. § 178.318-2 Container.
  4. § 178.318-3 Marking.
  5. § 178.320 General requirements applicable to all DOT specification cargo tank motor vehicles.
  6. § 178.337 Specification MC 331; cargo tank motor vehicle primarily for transportation of compressed gases as defined in subpart G of part 173 of this subchapter.
  7. § 178.337-1 General requirements.
  8. § 178.337-2 Material.
  9. § 178.337-3 Structural integrity.
  10. § 178.337-4 Joints.
  11. § 178.337-5 Bulkheads, baffles and ring stiffeners.
  12. § 178.337-6 Closure for manhole.
  13. § 178.337-7 Overturn protection.
  14. § 178.337-8 Openings, inlets, and outlets.
  15. § 178.337-9 Pressure relief devices, piping, valves, hoses, and fittings.
  16. § 178.337-10 Accident damage protection.
  17. § 178.337-11 Emergency discharge control.
  18. § 178.337-12 [Reserved]
  19. § 178.337-13 Supporting and anchoring.
  20. § 178.337-14 Gauging devices.
  21. § 178.337-15 Pumps and compressors.
  22. § 178.337-16 Testing.
  23. § 178.337-17 Marking.
  24. § 178.337-18 Certification.
  25. § 178.338 Specification MC-338; insulated cargo tank motor vehicle.
  26. § 178.338-1 General requirements.
  27. § 178.338-2 Material.
  28. § 178.338-3 Structural integrity.
  29. § 178.338-4 Joints.
  30. § 178.338-5 Stiffening rings.
  31. § 178.338-6 Manholes.
  32. § 178.338-7 Openings.
  33. § 178.338-8 Pressure relief devices, piping, valves, and fittings.
  34. § 178.338-9 Holding time.
  35. § 178.338-10 Accident damage protection.
  36. § 178.338-11 Discharge control devices.
  37. § 178.338-12 Shear section.
  38. § 178.338-13 Supporting and anchoring.
  39. § 178.338-14 Gauging devices.
  40. § 178.338-15 Cleanliness.
  41. § 178.338-16 Inspection and testing.
  42. § 178.338-17 Pumps and compressors.
  43. § 178.338-18 Marking.
  44. § 178.338-19 Certification.
  45. §§ 178.340-178.343 [Reserved]
  46. § 178.345 General design and construction requirements applicable to Specification DOT 406 (§ 178.346), DOT 407 (§ 178.347), and DOT 412 (§ 178.348) cargo tank motor vehicles.
  47. § 178.345-1 General requirements.
  48. § 178.345-2 Material and material thickness.
  49. § 178.345-3 Structural integrity.
  50. § 178.345-4 Joints.
  51. § 178.345-5 Manhole assemblies.
  52. § 178.345-6 Supports and anchoring.
  53. § 178.345-7 Circumferential reinforcements.
  54. § 178.345-8 Accident damage protection.
  55. § 178.345-9 Pumps, piping, hoses and connections.
  56. § 178.345-10 Pressure relief.
  57. § 178.345-11 Tank outlets.
  58. § 178.345-12 Gauging devices.
  59. § 178.345-13 Pressure and leakage tests.
  60. § 178.345-14 Marking.
  61. § 178.345-15 Certification.
  62. § 178.346 Specification DOT 406; cargo tank motor vehicle.
  63. § 178.346-1 General requirements.
  64. § 178.346-2 Material and thickness of material.
  65. § 178.346-3 Pressure relief.
  66. § 178.346-4 Outlets.
  67. § 178.346-5 Pressure and leakage tests.
  68. § 178.347 Specification DOT 407; cargo tank motor vehicle.
  69. § 178.347-1 General requirements.
  70. § 178.347-2 Material and thickness of material.
  71. § 178.347-3 Manhole assemblies.
  72. § 178.347-4 Pressure relief.
  73. § 178.347-5 Pressure and leakage test.
  74. § 178.348 Specification DOT 412; cargo tank motor vehicle.
  75. § 178.348-1 General requirements.
  76. § 178.348-2 Material and thickness of material.
  77. § 178.348-3 Pumps, piping, hoses and connections.
  78. § 178.348-4 Pressure relief.
  79. § 178.348-5 Pressure and leakage test.
Source:
29 FR 18975, Dec. 29, 1964, unless otherwise noted. Redesignated at 32 FR 5606, Apr. 5, 1967.