9 CFR 417.1 - Definitions.
For purposes of this part, the following definitions shall apply:
Corrective action. Procedures to be followed when a deviation occurs.
Critical control point. A point, step, or procedure in a food process at which control can be applied and, as a result, a food safety hazard can be prevented, eliminated, or reduced to acceptable levels.
Critical limit. The maximum or minimum value to which a physical, biological, or chemical hazard must be controlled at a critical control point to prevent, eliminate, or reduce to an acceptable level the occurrence of the identified food safety hazard.
Food safety hazard. Any biological, chemical, or physical property that may cause a food to be unsafe for human consumption.
HACCP System. The HACCP plan in operation, including the HACCP plan itself.
Hazard. SEE Food Safety Hazard.
Preventive measure. Physical, chemical, or other means that can be used to control an identified food safety hazard.
Process-monitoring instrument. An instrument or device used to indicate conditions during processing at a critical control point.
Responsible establishment official. The individual with overall authority on-site or a higher level official of the establishment.
Title 9 published on 2015-12-04
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 9 CFR Part 417 after this date.
Title 9 published on 2015-12-04.
No entries appear in the Federal Register after this date, for 9 CFR Part 417.