A. The Department shall provide a vehicle
inspected at a state station with a uniquely numbered vehicle inspection report
of a design approved by the Director that contains, at a minimum, the following
information, as applicable to the tests required for the vehicle under
R18-2-1006:
1. License plate number;
2. Vehicle identification number;
3. Model year of vehicle;
4. Make of vehicle;
5. Style of vehicle;
6. Type of fuel;
7. Odometer reading ;
8. Emissions standards for idle and loaded
cruise modes, if applicable;
9.
Emissions measurements during idle and loaded cruise modes, if
applicable;
10. Opacity
measurements and standards, if applicable;
11. Emissions standards and measurements for
the transient loaded test, and the evaporative system pressure test, if
applicable;
12. Results of OBD test
including all diagnostic trouble codes that commanded the illumination of the
malfunction indicator l
13.
Tampering inspection results;
14.
Liquid fuel leak inspection results;
15.
14. Repair requirements;
16.
15. Final test
results;
17.
16. Repairs performed;
18.
17. Cost of
emissions-related repairs;
19.
18. Cost of
tampering-related repairs;
20.
19. Name, address, and
telephone number of the business or person making repairs;
21.
20.
Signature and certification number of person certifying repairs;
22.
21.
Date of inspection;
23.
22. Test results of the previous inspection if the
inspection is a reinspection;
24.
23. Inspection
station, lane locators; and
25.
24. Test number and
time of test.
B. A
vehicle failing the initial inspection shall receive the Department's approved
inspection report supplement containing, at a minimum, the following:
1. Diagnostic and tampering information
including acceptable replacement units, and
2. Applicable maximum repair costs.
C. The inspection report shall
include a section that may be used as a certificate of compliance for vehicles
passing the inspection or as a certificate of waiver, if applicable. The
section shall contain all of the following information:
1. License plate number,
2. Vehicle identification number,
3. Final results,
4. Serial number of the inspection
report,
5. Date of
inspection,
6. Model
year,
7. Make,
8. Date of initial inspection,
9. Inspection fee, and
10. Label as either a certificate of
compliance or a certificate of waiver.
1.
The tear-out section shall be a certificate of
compliance when the word "compliance" appears in the appropriate location on
the printout.
2.
The tear-out section shall be a certificate of
waiver when the word "waiver" appears in the appropriate location on the
printout.
3.
The tear-out section shall contain all of the
following information:
a.
License plate number,
b.
Vehicle identification number,
c.
Final results,
d.
Serial number of the inspection
report,
e.
Date of inspection,
f.
Model year,
g.
Make,
h. Date of initial inspection,
and
i. Inspection fee.
D. At
the time of registration, the certificate of compliance or certificate of
waiver may be submitted to the Arizona Department of Transportation Motor
Vehicle Division as evidence of meeting the requirements of this
Article.
