Ill. Admin. Code tit. 35, § 703.280 - Permit Modification at the Request of the Permittee
a) Class 1 Modifications. See Section
703.281.
b) Class 2 Modifications. See Section
703.282.
c) Class 3 Modifications. See Section
703.283.
d) Other Modificattions
1) In the case of modifications not
explicitly listed in Appendix A, the permittee may submit a Class 3
modification request to the Agency, or the permittee may request a
determination by the Agency that the modification be reviewed and approved as a
Class 1 or Class 2 modification. If the permittee requests that the
modification be classified as a Class 1 or 2 modification, the permittee must
provide the Agency with the necessary information to support the requested
classification.
2) The Agency must
make the determination described in subsection (d)(1) as promptly as
practicable. In determining the appropriate class for a specific modification,
the Agency must consider the similarity of the modification to other
modifications codified in Appendix A and the following criteria:
A) Class 1 modifications apply to minor
changes that keep the permit current with routine changes to the facility or
its operation. These changes do not substantially alter the permit conditions
or reduce the capacity of the facility to adequately protect human health or
the environment. In the case of Class 1 modifications, the Agency may require
prior approval.
B) Class 2
modifications apply to changes that are necessary to enable a permittee to
respond, in a timely manner, to any of the following:
i) Common variations in the types and
quantities of the wastes managed under the facility permit;
ii) Technological advances; and
iii) Changes necessary to comply with new
regulations, where these changes can be implemented without substantially
changing design specifications or management practices in the permit.
C) Class 3 modifications
substantially alter the facility or its operation.
e) Temporary Authorizations
1) Upon request of the permittee, the Agency
must, without prior public notice and comment, grant the permittee a temporary
authorization in accordance with this subsection (e). Temporary authorizations
have a term of not more than 180 days.
2) Procedures
A) The permittee may request a temporary
authorization for the following:
i) Any Class
2 modification meeting the criteria in subsection (e)(3)(B); and
ii) Any Class 3 modification that meets the
criteria in subsection (e)(3)(B)(i) or that meets the criteria in subsections
(e)(3)(B)(iii) through (e)(3)(B)(v) and provides improved management or
treatment of a hazardous waste already listed in the facility permit.
B) The temporary authorization
request must include the following:
i) A
description of the activities to be conducted under the temporary
authorization;
ii) An explanation
of why the temporary authorization is necessary; and
iii) Sufficient information to ensure
compliance with 35 Ill. Adm. Code 724 standards.
C) The permittee must send a notice about the
temporary authorization request to all persons on the facility mailing list
maintained by the Agency and to appropriate units of State and local
governments, as specified in 35 Ill. Adm. Code
705.163(a)(5).
This notification must be made within seven days after submission of the
authorization request.
3) The Agency must approve or deny the
temporary authorization as quickly as practical. To issue a temporary
authorization, the Agency must find as follows:
A) That the authorized activities are in
compliance with the standards of 35 Ill. Adm. Code 724.
B) That the temporary authorization is
necessary to achieve one of the following objectives before action is likely to
be taken on a modification request:
i) To
facilitate timely implementation of closure or corrective action
activities;
ii) To allow treatment
or storage in tanks, containers, or containment buildings, in accordance with
35 Ill. Adm. Code 728;
iii) To
prevent disruption of ongoing waste management activities;
iv) To enable the permittee to respond to
sudden changes in the types or quantities of the wastes managed under the
facility permit; or
v) To
facilitate other changes to adequately protect human health and the
environment.
4) A temporary authorization must be reissued
for one additional term of up to 180 days, provided that the permittee has
requested a Class 2 or 3 permit modification for the activity covered in the
temporary authorization, and either of the following is true:
A) The reissued temporary authorization
constitutes the Agency's decision on a Class 2 permit modification in
accordance with Section
703.282(f)(1)(D) or
(f)(2)(D); or
B) The Agency determines that the reissued
temporary authorization involving a Class 3 permit modification request is
warranted to allow the authorized activities to continue while the modification
procedures of 35 Ill. Adm. Code
703.283 are conducted.
f) Public Notice and
Appeals of Permit Modification Decisions
1)
The Agency must notify persons on the facility mailing list and appropriate
units of State and local government within 10 days after any decision to grant
or deny a Class 2 or 3 permit modification request. The Agency must also notify
such persons within 10 days after an automatic authorization for a Class 2
modification goes into effect pursuant to Section
703.282(f)(3) or
(f)(5).
2) The Agency's decision to grant or deny a
Class 2 or 3 permit modification request may be appealed under the permit
appeal procedures of 35 Ill. Adm. Code
705.212.
3) An automatic authorization that goes into
effect pursuant to Section
703.282(f)(3) or
(f)(5) may be appealed under the permit
appeal procedures of 35 Ill. Adm. Code
705.212; however, the permittee
may continue to conduct the activities pursuant to the automatic authorization
until the Board enters a final order on the appeal notwithstanding the
provisions of 35 Ill. Adm. Code
705.204.
g) Newly Regulated Wastes and Units
1) The permittee is authorized to continue to
manage wastes listed or identified as hazardous pursuant to 35 Ill. Adm. Code
721, or to continue to manage hazardous waste in units newly regulated as
hazardous waste management units, if each of the following is true:
A) The unit was in existence as a hazardous
waste facility with respect to the newly listed or characterized waste or newly
regulated waste management unit on the effective date of the final rule listing
or identifying the waste, or regulating the unit;
B) The permittee submits a Class 1
modification request on or before the date on which the waste becomes subject
to the new requirements;
D) The permittee also
submits a complete Class 2 or 3 modification request within 180 days after the
effective date of the rule listing or identifying the waste, or subjecting the
unit to management standards pursuant to 35 Ill. Adm. Code 724, 725, or 726;
and
E) In the case of land disposal
units, the permittee certifies that such unit is in compliance with all
applicable requirements of 35 Ill. Adm. Code 725 for groundwater monitoring and
financial responsibility requirements on the date 12 months after the effective
date of the rule identifying or listing the waste as hazardous, or regulating
the unit as a hazardous waste management unit. If the owner or operator fails
to certify compliance with all these requirements, the owner or operator loses
authority to operate pursuant to this Section.
2) New wastes or units added to a facility's
permit pursuant to this subsection (g) do not constitute expansions for the
purpose of the 25 percent capacity expansion limit for Class 2
modifications.
h)
Military Hazardous Waste Munitions Treatment and Disposal. The permittee is
authorized to continue to accept waste military munitions notwithstanding any
permit conditions barring the permittee from accepting off-site wastes, if each
of the following is true:
1) The facility was
in existence as a hazardous waste facility and the facility was already
permitted to handle the waste military munitions on the date when the waste
military munitions became subject to hazardous waste regulatory
requirements;
2) On or before the
date when the waste military munitions become subject to hazardous waste
regulatory requirements, the permittee submits a Class 1 modification request
to remove or amend the permit provision restricting the receipt of off-site
waste munitions; and
3) The
permittee submits a complete Class 2 modification request within 180 days after
the date when the waste military munitions became subject to hazardous waste
regulatory requirements.
i) Permit Modification List. The Agency must
maintain a list of all approved permit modifications and must publish a notice
once a year in a State-wide newspaper that an updated list is available for
review.
j) Combustion Facility
Changes to Meet 40 CFR 63 MACT Standards. The following procedures apply to
hazardous waste combustion facility permit modifications requested pursuant to
Appendix A, paragraph L(9).
1) A facility
owner or operator must have complied with the federal notification of intent to
comply (NIC) requirements of
40 CFR
63.1210 that was in effect prior to October
11, 2000, (see subpart EEE of 40 CFR 63 (2000), incorporated by reference in 35
Ill. Adm. Code 720.111(b)) in order to request a permit modification pursuant
to this Section for the purpose of technology changes needed to meet the
standards of
40
CFR 63.1203,
63.1204,
and
63.1205,
incorporated by reference in 35 Ill. Adm. Code 720.111(b).
2) If the Agency does not act to either
approve or deny the request within 90 days of receiving it, the request must be
deemed approved. The Agency may, at its discretion, extend this 90-day deadline
one time for up to 30 days by notifying the facility owner or operator in
writing before the 90 days has expired. A facility owner or operator must
comply with the NIC requirements of
40 CFR
63.1210(b) and
63.1212(a)
before a permit modification can be requested under this Section for the
purpose of technology changes needed to meet the
40
CFR 63.1215,
63.1216,
63.1217,
63.1218,
63.1219,
63.1220,
and
63.1221
standards as added on October 12, 2005, incorporated by reference in 35 Ill.
Adm. Code 720.111(b).
k)
Waiver of RCRA Permit Conditions in Support of Transition to the 40 CFR 63 MACT
Standards
1) The facility owner or operator
may request to have specific RCRA operating and emissions limits waived by
submitting a Class 1 permit modification request under Appendix A, paragraph
L.10. The owner or operator must provide the information described in
subsections (k)(1)(A) though (k)(1)(C), with Agency review subject to the
conditions of subsection (k)(1)(D):
A) It
must identify the specific RCRA permit operating and emissions limits that the
owner or operator is requesting to waive;
B) It must provide an explanation of why the
changes are necessary in order to minimize or eliminate conflicts between the
RCRA permit and MACT compliance; and
C) It must discuss how the revised provisions
will be sufficiently protective.
D)
The Agency must approve or deny the request within 30 days after receipt of the
request. The Agency may, at its discretion, extend this 30-day deadline one
time for up to 30 days by notifying the facility owner or operator in
writing.
2) To request
this modification in conjunction with MACT performance testing, where permit
limits may only be waived during actual test events and pretesting, as defined
under
40 CFR
63.1207(h)(2)(i) and
(h)(2)(ii), incorporated by reference in 35
Ill. Adm. Code 720.111(b), for an aggregate time not to exceed 720 hours of
operation (renewable at the discretion of the Agency) the owner or operator
must fulfill the conditions of subsection (k)(2)(A), subject to the conditions
of subsection (k)(2)(B):
A) It must submit
its modification request to the Agency at the same time it submits its test
plans to the Agency.
B) The Agency
may elect to approve or deny the request contingent upon approval of the test
plans.
Notes
Amended at 37 Ill. Reg. 17659, effective October 24, 2013
BOARD NOTE: Derived from 40 CFR 270.42(d) through (k) (2017).
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.