Article 46 - UNDERGROUND INJECTION CONTROL REGULATIONS

  1. § 28-46-1 - General requirements
  2. § 28-46-2 - Revoked
  3. § 28-46-2a - Definitions
  4. § 28-46-3 - Classification of injection wells
  5. § 28-46-4 - Injection of hazardous or radioactive wastes into or above an underground source of drinking water
  6. § 28-46-5 - Application for injection well permits
  7. § 28-46-6 - Conditions applicable to all permits
  8. § 28-46-7 - Draft permits
  9. § 28-46-8 - Fact sheets
  10. § 28-46-9 - Establishing permit conditions
  11. § 28-46-10 - Term of permits
  12. § 28-46-11 - Schedules of compliance
  13. § 28-46-12 - Requirements for recording and reporting of monitoring results
  14. § 28-46-13 - Effect of a permit
  15. § 28-46-14 - Transfer of permits
  16. § 28-46-15 - Modification and reissuance of permits
  17. § 28-46-16 - Termination of permits
  18. § 28-46-17 - Minor modifications of permits
  19. § 28-46-18 - Area permits
  20. § 28-46-19 - Emergency permits
  21. § 28-46-20 - Corrective action
  22. § 28-46-21 - Public notice, public comments, and public hearings
  23. § 28-46-22 - Signatories
  24. § 28-46-23 - Claims of confidentiality
  25. § 28-46-24 - Requirements for wells injecting hazardous wastes
  26. § 28-46-25 - Prohibition of unauthorized injection
  27. § 28-46-26 - Revoked
  28. § 28-46-26a - Prohibited class V wells
  29. § 28-46-27 - Prohibition of fluid movement into underground sources of drinking water
  30. § 28-46-28 - Establishing maximum injection pressure
  31. § 28-46-29 - Design and construction requirements
  32. § 28-46-29a - Operation of class III salt solution mining wells
  33. § 28-46-30 - Monitoring and reporting requirements for class I wells
  34. § 28-46-30a - Monitoring and reporting requirements for class III salt solution mining wells
  35. § 28-46-30b - Groundwater monitoring for class III salt solution mining wells
  36. § 28-46-31 - Information to be considered by the secretary
  37. § 28-46-32 - Area of review
  38. § 28-46-33 - Mechanical integrity testing
  39. § 28-46-34 - Plugging and abandonment
  40. § 28-46-34a - Closure of class V motor vehicle waste disposal wells (MVWDW) and large-capacity cesspools
  41. § 28-46-35 - State inspection and right of entry
  42. § 28-46-36 - Waiver of requirements by secretary
  43. § 28-46-37 - Revoked
  44. § 28-46-38 - Inventory and assessment of class V injection wells
  45. § 28-46-39 - Revoked
  46. § 28-46-40 - Exempted aquifers
  47. § 28-46-41 - Sharing of information
  48. § 28-46-42 - Exclusion of oil and gas related wells
  49. § 28-46-43 - Analyses to be performed by laboratory certified by the secretary
  50. § 28-46-44 - Sampling and analysis techniques
  51. § 28-46-45 - Salt solution mining well operations; fees

State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.

No prior version found.