Mich. Admin. Code R. 336.1974 - Emissions standards for existing commercial and industrial solid waste incinerators
Rule 974.
(1) This
rule applies to all existing Commercial and Industrial Solid Waste Incinerator
(CISWI) units and all Air Curtain Incinerators (ACIs), defined under
40 CFR
60.2875, adopted by reference in
R
336.1902.
(2) CISWI units and ACIs that commenced
construction by November 30, 1999 must comply with this rule according to
40 CFR
60.2535(a)(1) and (2),
adopted by reference in
R
336.1902, or date of promulgation of this rule,
whichever is later.
(3) The
following units must comply with this rule according to
40 CFR
60.2535(b), adopted by
reference in
R
336.1902, or date of promulgation of this rule,
whichever is later:
(a) Units in the
incinerator subcategory or ACIs that commenced construction between November
30, 1999 and June 4, 2010,
(b)
Units in the incinerator subcategory or ACIs that commenced reconstruction or
modification between June 1, 2001 and August 7, 2013,
(c) Units in the small remote incinerator ,
energy recovery, or waste -burning kiln subcategories that commenced
construction before June 4, 2010.
(4) CISWI units that are exempt under
40 CFR
60.2555, adopted by reference in
R
336.1902, are exempt from this rule if the applicable
requirements listed in
40 CFR
60.2555 are followed.
(5) A CISWI unit or ACI is still subject to
this rule, and not 40 CFR part 60, subpart CCCC, if the owner or operator makes
physical or operational changes primarily to comply with this rule. However,
modification or reconstruction of a CISWI unit or ACI made after August 7, 2013
makes that unit subject to 40 CFR part 60, subpart CCCC, and not this
rule.
(6) Owners and operators of
CISWI units and ACIs subject to this rule must comply with the following
reporting requirements and timelines of 40 CFR part 60, subpart DDDD, "Emission
Guidelines and Compliance Times for Commercial and Industrial Solid Waste
Incineration Units," adopted by reference in
R
336.1902:
(a) Final
control plan and notification of final compliance required under
40
CFR 60.2575 to
60.2600,
and
60.2815
to
60.2840
by the compliance date of this rule.
(b) Waste management plan required under
40 CFR
60.2620 to
60.2630
by the compliance date of this rule.
(c) Report submittal requirement under
40
CFR 60.2760 for the initial test results
obtained under
40
CFR 60.2700, site -specific operating limits
established under
40 CFR
60.2675 or
60.2680,
and fabric filter documentation required by
40
CFR 60.2730(b).
(f) Notification and recordkeeping required
under
40 CFR
60.7. (40 CFR
60.7 is adopted by reference in
R
336.1902).
(g) Notification and timing requirements
under
40
CFR 60.2790(b) of continued
operation with waste -to-fuel switch.
(7) Owners and operators of CISWI units and
ACIs subject to this rule must comply with the following applicable sections of
40 CFR part 60, subpart DDDD, adopted by reference in
R
336.1902:
(e) Emission and operating limits in
40 CFR
60.2670 to
60.2680,
60.2860,
and the applicable Tables 2 to 3 and 6 to 9.
(g) Initial and continuous compliance and
inspection of control equipment in
40
CFR 60.2700 to
60.2725,
60.2865
and
60.8
(40 CFR 60.8 is
adopted by reference in
R
336.1902).
(k) Toxic Equivalency Factors in Table
4.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.