Minn. R. agency 144, ch. 4626, CLEANING EQUIPMENT AND UTENSILS, pt. 4626.0885 - UTENSILS AND EQUIPMENT; RINSING PROCEDURES. 4-603.16
Washed utensils and equipment must be rinsed so that abrasives are removed and cleaning chemicals are removed or diluted through the use of water or a detergent-sanitizer solution using one of the following procedures:
A. use of a distinct,
separate water rinse after washing and before sanitizing if using:
(1) a 3-compartment sink;
(2) alternative manual warewashing equipment
equivalent to a 3-compartment sink specified in part 4626.0680, item C;
or
(3) a 3-step washing, rinsing,
and sanitizing procedure in a warewashing system for CIP equipment;
B. use of a detergent-sanitizer
specified in part 4626.0810 if using:
(1)
alternative warewashing equipment specified in part 4626.0680, item C, that is
approved for use with a detergent-sanitizer; or
(2) a warewashing system for CIP
equipment;
C. if using a
warewashing machine that does not recycle the sanitizing solution as specified
in item D, or alternative manual warewashing equipment, such as sprayers, use
of a nondistinct water rinse that is:
(1)
integrated in the application of the sanitizing solution; and
(2) wasted immediately after each
application; or
D. if
using a warewashing machine that recycles the sanitizing solution for use in
the next wash cycle, use of a nondistinct water rinse that is integrated in the
application of the sanitizing solution.
Notes
Statutory Authority: MS s 31.101; 31.11; 144.05; 144.08; 144.12; 157.011
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.