Utah Admin. Code R392-402-5 - Water Supply
(1) Potable water
supply systems for use by manufactured home community occupants shall be
designed, installed, and operated according to the requirements set forth by:
(a) Plumbing Code;
(b) The Utah Department of Environmental
Quality, Division of Drinking Water under Title R309; and
(c) Local health department
regulations.
(2) The
operator shall provide a potable water connection to each manufactured home
space.
(a) Shut-off valves on water
connections for individual manufactured homes shall be of the inverted key
pattern stop-and-waste type or an approved anti-siphon yard hydrant.
(3) Plumbing fixtures that
normally require water for their operation shall be supplied with adequate
potable water supply under pressure.
(4) The operator shall provide hot and cold
running water under pressure at each service building for showers or bath
fixtures, hand sinks, and laundry facilities when provided.
(5) A manufactured home community in which
spaces are set aside for vehicles, manufactured homes, or other temporary
dwellings not provided with toilet, sink, and bathing plumbing fixtures, as in
R392-402-4(6),
shall be provided with a common-use, non-threaded water faucet or spigot that
shall be accessible to community occupants.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.