30 CFR 250.911 - If my platform is subject to the Platform Verification Program, what must I do?
(a) Design, fabricate, install, use, maintain and inspect your platform, conversion, or major modification or repair to your platform according to the requirements of this subpart, and the applicable documents listed in § 250.901(a) of this subpart;
(d) Submit a complete schedule of all phases of design, fabrication, and installation for the Regional Supervisor's approval. You must include a project management timeline, Gantt Chart, that depicts when interim and final reports required by §§ 250.916, 250.917, and 250.918 will be submitted to the Regional Supervisor for each phase. On the timeline, you must break-out the specific scopes of work that inherently stand alone (e.g., deck, mooring systems, tendon systems, riser systems, turret systems).
(f) Follow the additional requirements in §§ 250.913 through 250.918;
(g) Obtain approval for modifications to approved plans and for major deviations from approved installation procedures from the Regional Supervisor; and
(h) Comply with applicable USCG regulations for floating OCS facilities.
Title 30 published on 20-Dec-2017 04:15
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 30 CFR Part 250 after this date.