(1) Except as provided in section
93115.3 and section
93115.10(a)(5)
below, prior to the installation of any
new stationary CI engine ( > 50 bhp)
at a
facility, each
owner or operator shall provide the information identified
in section
93115.10(a)(3) to
the
District APCO.
(2) Except as
provided in section
93115.3 and section
93115.10(a)(5)
below, no later than July 1, 2005, each
owner or operator of an
in-use
stationary CI engine ( >50 bhp) shall provide the information specified in
section
93115.10(a)(3) to
the
District APCO.
(3) Each
owner
or operator shall
submit to the
District APCO the following information for
each
new and
in-use stationary CI engine ( >50 bhp) in accordance with the
requirements of sections
93115.10(a)(1) and
(2) above:
(A) Owner/
Operator Contact Information
1. Company name
2. Contact name, phone number, address,
e-mail address
3. Address of
engine(s)
(B) Engine
Information
1. Make,
2. Model,
3. Engine Family,
4. Serial number,
5. Year of manufacture (if unable to
determine, approximate age),
6.
Rated Brake Horsepower Rating,
7.
Exhaust stack height from ground,
8. Engine Emission Factors and supporting
data for PM, NOx and NMHC separately or NMHC+NOx, and CO, (if available) from
manufacturers data, source tests, or other sources (specify),
9. Diameter of stack outlet,
10. Direction of outlet (horizontal or
vertical),
11. End of stack (open
or capped),
12. Control equipment
(if applicable)
a. Turbocharger,
b. Aftercooler,
c. Injection Timing Retard,
d. Catalyst,
e. Diesel Particulate Filter,
f. Other;
(C) Fuel(s) Used
1. CARB Diesel,
2. Jet fuel,
3. Diesel,
4. Alternative diesel fuel
(specify),
5. Alternative fuel
(specify),
6. Combination (Dual
fuel) (specify),
7. Other
(specify);
(D) Operation
Information, including:
1. Describe general
use of engine,
2. Typical load
(percent of maximum bhp rating),
3.
Typical annual hours of operation,
4. If seasonal, months of year operated and
typical hours per month operated,
5. Fuel usage rate (if
available);
(E) Receptor
Information, including:
1. Nearest receptor
description (receptor type),
2.
Distance to nearest receptor (feet or meters),
3. Distance to nearest school
grounds;
(F) A statement
whether the engine is included in an existing AB 2588 emission
inventory.
(4) Except as
provided in section
93115.3, no later than 180
days
prior to the earliest applicable compliance date specified in sections
93115.11 or
93115.12, each
owner or operator
of an
in-use stationary
diesel-fueled CI
engine greater than 50 brake
horsepower ( > 50 bhp) shall provide the following additional information to
the
District APCO: an identification of the
control strategy for each
stationary
diesel-fueled CI
engine that when implemented will result in
compliance with sections
93115.6 and
93115.7. If applicable, the
information should include the Executive Order number issued by the
Executive
Officer for a Diesel
Emission Control Strategy that has been approved by the
Executive Officer through the Verification Procedure.