Haw. Code R. § 11-270-16 - Specific Part B information requirements for tank systems
Except as otherwise provided in section 11-264-190, owners and operators of facilities that use tanks to store or treat hazardous waste must provide the following additional information:
(a)
A written assessment that is reviewed and certified by an independent,
qualified, registered professional engineer as to the structural integrity and
suitability for handling hazardous waste of each tank system, as required under
sections 11-264-191 and 11-264-192;
(b) Dimensions and capacity of each
tank;
(c) Description of feed
systems, safety cutoff, bypass systems, and pressure controls (e.g.,
vents);
(d) A diagram of piping,
instrumentation, and process flow for each tank system;
(e) A description of materials and equipment
used to provide external corrosion protection, as required under subparagraph
11-264-192(a) (3) (ii);
(f) For new
tank systems, a detailed description of how the tank system(s) will be
installed in compliance with subsections 11-264-192(b) through (e);
(g) Detailed plans and description of how the
secondary containment system for each tank system is or will be designed,
constructed, and operated to meet the requirements of subsections 11-264-193(a)
through (f);
(h) For tank systems
for which a variance from the requirements of section 11-264-193 is sought (as
provided by subsection 11-264-193(g)):
(1)
Detailed plans and engineering and hydrogeologic reports, as appropriate,
describing alternate design and operating practices that will, in conjunction
with location aspects, prevent the migration of any hazardous waste or
hazardous constituents into the ground water or surface water during the life
of the facility, or
(2) A detailed
assessment of the substantial present or potential hazards posed to human
health or the environment should a release enter the environment.
(i) Description of controls and
practices to prevent spills and overflows, as required under subsection
11-264-194(b); and
(j) For tank
systems in which ignitable, reactive, or incompatible wastes are to be stored
or treated, a description of how operating procedures and tank system and
facility design will achieve compliance with the requirements of sections
11-264-198 and 11-264-199.
(k)
Information on air emission control equipment as required in section
11-270-27.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.