CHAPTER 296-150V - Conversion vendor units and medical units (296-150V-0010 to 296-150V-3000)

  1. 296-150V-0010 - Authority, purpose, and scope
  2. 296-150V-0020 - What definitions apply to this chapter?
  3. 296-150V-0030 - How is this chapter enforced?
  4. 296-150V-0040 - Is manufacturing information kept confidential?
  5. 296-150V-0050 - Can you prohibit the sale or lease of a conversion vendor unit or medical unit?
  6. 296-150V-0060 - Who handles consumer complaints about conversion vendor units or medical units?
  7. 296-150V-0070 - Do you have reciprocal agreements with other states to inspect conversion vendor units and medical units?
  8. 296-150V-0080 - Do you allow a local enforcement agency to inspect conversion vendor units and medical units at the manufacturing location?
  9. 296-150V-0100 - What happens if I disagree with your decision regarding my compliance with this chapter?
  10. 296-150V-0110 - Do you have an advisory board to address conversion vendor unit and medical unit issues?
  11. 296-150V-0120 - Where can I obtain technical assistance regarding conversion vendor units or medical units?
  12. 296-150V-0140 - Do you allow the use of alternate materials, design, or method of construction?
  13. 296-150V-0200 - Who must obtain conversion vendor unit or medical unit insignia?
  14. 296-150V-0205 - Can I obtain an exempt vendor/medical insignia? (Repealed)
  15. 296-150V-0210 - What are the insignia requirements?
  16. 296-150V-0220 - How do I obtain insignia information and the required forms?
  17. 296-150V-0230 - What are the insignia application requirements?
  18. 296-150V-0240 - What documentation do you need to perform an alteration inspection?
  19. 296-150V-0250 - How do I replace lost or damaged insignia?
  20. 296-150V-0300 - When is design-plan approval required?
  21. 296-150V-0310 - Who can approve design plans?
  22. 296-150V-0320 - What must I provide with my request for conversion vendor unit or medical unit design-plan approval by the department?
  23. 296-150V-0340 - When is an engineering analysis or structural load test for design plans required?
  24. 296-150V-0350 - What must test procedures and results for design plans include?
  25. 296-150V-0380 - What happens if you approve my design plan?
  26. 296-150V-0390 - If my design plan is not approved, how much time do I have to submit a corrected design plan?
  27. 296-150V-0400 - What happens after my design plan is approved?
  28. 296-150V-0410 - When does my design plan expire?
  29. 296-150V-0415 - Who approves addendums to design plans?
  30. 296-150V-0495 - Contractor deposit accounts
  31. 296-150V-0500 - When is an inspection required?
  32. 296-150V-0510 - How do I request an inspection?
  33. 296-150V-0520 - What happens if my conversion vendor unit or medical unit passes inspection?
  34. 296-150V-0530 - Am I charged if I request an inspection but I am not prepared?
  35. 296-150V-0540 - Who inspects a conversion vendor unit or medical unit installation at the building site or event location?
  36. 296-150V-0550 - Do you allow a conversion vendor unit or medical unit to be completed at the installation site?
  37. 296-150V-0560 - What happens if I receive a notice of noncompliance after inspection of the alteration to my conversion vendor unit or medical unit?
  38. 296-150V-0580 - Must I obtain an insignia for used conversion vendor units or medical units?
  39. 296-150V-0590 - How do I obtain insignia for used conversion vendor units or medical units?
  40. 296-150V-0700 - Must manufacturers of conversion vendor units and medical units notify you if they manufacture at more than one location?
  41. 296-150V-0710 - Must manufacturers of conversion vendor units and medical units notify you of a change in business name or address?
  42. 296-150V-0720 - Must manufacturers of conversion vendor units and medical units notify you of a change in business ownership?
  43. 296-150V-0800 - What codes apply to conversion vendor units or medical units?
  44. 296-150V-0930 - When are structural load tests or structural calculations required?
  45. 296-150V-0950 - What requirements apply to roof coverings?
  46. 296-150V-1040 - Are there floor requirements?
  47. 296-150V-1070 - What requirements apply to floor closure material?
  48. 296-150V-1090 - What are the standards for equipment and installations?
  49. 296-150V-1100 - What are the flame-spread limitations?
  50. 296-150V-1110 - Combustible limitations
  51. 296-150V-1120 - What are the standards for wall and cabinet protection?
  52. 296-150V-1170 - What are the light and ventilation requirements?
  53. 296-150V-1180 - What requirements apply to conversion vendor unit exits?
  54. 296-150V-1185 - What exit door requirements apply to self-propelled medical unit exits?
  55. 296-150V-1190 - Interior privacy locks
  56. 296-150V-1303 - How must storage batteries be installed in a conversion vendor unit or medical unit?
  57. 296-150V-1330 - What are the mechanical requirements for a conversion vendor unit or medical unit?
  58. 296-150V-1350 - What are the LPG system enclosure and mounting requirements for a conversion vendor unit or medical unit?
  59. 296-150V-1360 - What are the fuel gas piping design requirements for a conversion vendor unit or medical unit?
  60. 296-150V-1380 - Can gas tubing be concealed in a conversion vendor unit or medical unit?
  61. 296-150V-1390 - What are the pipe-joint compound requirements for gas piping in a conversion vendor unit or medical unit?
  62. 296-150V-1400 - What are the gas piping hanger and support requirements for a conversion vendor unit or medical unit?
  63. 296-150V-1410 - What are the electrical bonding requirements for gas piping in a conversion vendor unit or medical unit?
  64. 296-150V-1420 - How are gas supply connections in a conversion vendor unit or medical unit identified?
  65. 296-150V-1430 - What requirements apply to gas piping system openings?
  66. 296-150V-1440 - Are gas piping shut-off valves required in a conversion vendor unit or medical unit?
  67. 296-150V-1450 - What requirements apply to testing for gas piping leaks before conversion vendor unit or medical unit appliances are connected?
  68. 296-150V-1460 - What requirements apply to testing for gas piping leaks after conversion vendor unit or medical unit appliances are connected?
  69. 296-150V-1470 - What are the requirements for appliance installations?
  70. 296-150V-1530 - What general plumbing requirements apply?
  71. 296-150V-1540 - What are the plumbing definitions?
  72. 296-150V-1550 - What requirements apply to drain outlets?
  73. 296-150V-1560 - What is the minimum clearance for drain outlets?
  74. 296-150V-1570 - What requirements apply to water-supply connections?
  75. 296-150V-1580 - What requirements apply to water heater relief valves and safety devices?
  76. 296-150V-1590 - What requirements apply to waste holding tanks for conversion vendor units?
  77. 296-150V-1600 - What are the requirements associated with medical and conversion vending units that have been manufactured and used outside the state according to RCW 43.22.380?
  78. 296-150V-3000 - Conversion vendor units and medical units-Fees

The following state regulations pages link to this page.