Chapter 296-79 - Safety standards for pulp, paper, and paperboard mills and converters

  1. § 296-79-010 - Scope and application
  2. § 296-79-011 - Definitions
  3. § 296-79-020 - General requirements
  4. § 296-79-030 - Guards and guarding
  5. § 296-79-040 - Fire protection, ignition sources and means of egress
  6. § 296-79-050 - Personal protection clothing and equipment
  7. § 296-79-070 - Illumination
  8. § 296-79-080 - Elevators, manlifts and other lifting devices
  9. § 296-79-090 - Electrical equipment and distribution
  10. § 296-79-100 - Floors, platforms, stairways, ladders, loading docks
  11. § 296-79-110 - Elevated runways and ramps used by vehicles
  12. § 296-79-120 - Scaffolds, construction, use and maintenance
  13. § 296-79-130 - Crossovers, aisles, passages
  14. § 296-79-140 - Installation, inspection, and maintenance of pipes, piping systems, and hoses
  15. § 296-79-150 - Powered industrial trucks and other equipment
  16. § 296-79-160 - Requirements for cranes and hoists - See general safety and health standards (chapter 296-24 WAC, Part D)
  17. § 296-79-170 - Requirements for crawler and truck cranes
  18. § 296-79-180 - Privately owned standard gauge railroad operations
  19. § 296-79-190 - Loading and unloading materials from railway cars or trucks
  20. § 296-79-200 - Bridge and dock plates
  21. § 296-79-210 - For conveyors, maintenance and inspection
  22. § 296-79-220 - Deactivating and lockout requirements
  23. § 296-79-230 - Confined spaces
  24. § 296-79-240 - Storage of fuel, oil, flammables and chemicals
  25. § 296-79-250 - Safety procedure for handling sulfur
  26. § 296-79-260 - Pulpwood storage and handling
  27. § 296-79-270 - Pulpwood preparation
  28. § 296-79-27003 - Log hauls, slips, and carriages
  29. § 296-79-27005 - Band saws
  30. § 296-79-27007 - Circular saws speeds and repairs
  31. § 296-79-27009 - Slasher saws-tables
  32. § 296-79-27011 - Circular swing saws
  33. § 296-79-27013 - Drag saws - Fixed chain saws - Circular cut-off saws
  34. § 296-79-27015 - Construction and use of pulpwood splitters
  35. § 296-79-280 - Chip and hog fuel storage
  36. § 296-79-290 - Stock preparation and reprocessing
  37. § 296-79-29001 - Digester valves and piping
  38. § 296-79-29003 - Warning of digester being blown
  39. § 296-79-29005 - Unplugging quick lime stoppages
  40. § 296-79-29007 - Bleach plant
  41. § 296-79-29009 - Audible alarm in bleach plant
  42. § 296-79-29011 - Pocket grinder doors
  43. § 296-79-29013 - Pulping device procedures
  44. § 296-79-29015 - Off machine repulping devices
  45. § 296-79-29017 - Pulping device cleaning, inspection and repairing
  46. § 296-79-29021 - Shredders and blowers
  47. § 296-79-29023 - Clearing shredder jams
  48. § 296-79-29027 - Guillotine type roll splitters
  49. § 296-79-29029 - Broke hole
  50. § 296-79-29031 - Industrial kiln guns and ammunition
  51. § 296-79-29033 - Chlorine dioxide system
  52. § 296-79-29035 - Piling and unpiling pulp
  53. § 296-79-29037 - Chocking rolls
  54. § 296-79-300 - Machine room equipment and procedures
  55. § 296-79-310 - Converting operations (bag and container manufacturing, printing, coating, finishing and related processes)
  56. § 296-79-31001 - General requirements for converting operations (bag and container manufacturing, printing, coating, finishing and related processes)
  57. § 296-79-31003 - Corrugator
  58. § 296-79-31009 - Die cutting
  59. § 296-79-320 - Sulfite recovery furnace area requirements

State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.

No prior version found.