30 CFR Part 816 - PERMANENT PROGRAM PERFORMANCE STANDARDS - SURFACE MINING ACTIVITIES

  1. § 816.1 Scope.
  2. § 816.2 Objectives.
  3. § 816.10 Information collection.
  4. § 816.11 Signs and markers.
  5. § 816.13 Casing and sealing of drilled holes: General requirements.
  6. § 816.14 Casing and sealing of drilled holes: Temporary.
  7. § 816.15 Casing and sealing of drilled holes: Permanent.
  8. § 816.22 Topsoil and subsoil.
  9. § 816.41 Hydrologic-balance protection.
  10. § 816.42 Hydrologic balance: Water quality standards and effluent limitations.
  11. § 816.43 Diversions.
  12. § 816.45 Hydrologic balance: Sediment control measures.
  13. § 816.46 Hydrologic balance: Siltation structures.
  14. § 816.47 Hydrologic balance: Discharge structures.
  15. § 816.49 Impoundments.
  16. § 816.56 Postmining rehabilitation of sedimentation ponds, diversions, impoundments, and treatment facilities.
  17. § 816.57 Hydrologic balance: Stream buffer zones.
  18. § 816.59 Coal recovery.
  19. § 816.61 Use of explosives: General requirements.
  20. § 816.62 Use of explosives: Preblasting survey.
  21. § 816.64 Use of explosives: Blasting schedule.
  22. § 816.66 Use of explosives: Blasting signs, warnings, and access control.
  23. § 816.67 Use of explosives: Control of adverse effects.
  24. § 816.68 Use of explosives: Records of blasting operations.
  25. § 816.71 Disposal of excess spoil: General requirements.
  26. § 816.72 Disposal of excess spoil: Valley fills/head-of-hollow fills.
  27. § 816.73 Disposal of excess spoil: Durable rock fills.
  28. § 816.74 Disposal of excess spoil: Preexisting benches.
  29. § 816.79 Protection of underground mining.
  30. § 816.81 Coal mine waste: General requirements.
  31. § 816.83 Coal mine waste: Refuse piles.
  32. § 816.84 Coal mine waste: Impounding structures.
  33. § 816.87 Coal mine waste: Burning and burned waste utilization.
  34. § 816.89 Disposal of noncoal mine wastes.
  35. § 816.95 Stabilization of surface areas.
  36. § 816.97 Protection of fish, wildlife, and related environmental values.
  37. § 816.99 Slides and other damage.
  38. § 816.100 Contemporaneous reclamation.
  39. § 816.101 Backfilling and grading: Time and distance requirements.
  40. § 816.102 Backfilling and grading: General requirements.
  41. § 816.104 Backfilling and grading: Thin overburden.
  42. § 816.105 Backfilling and grading: Thick overburden.
  43. § 816.106 Backfilling and grading: Previously mined areas.
  44. § 816.107 Backfilling and grading: Steep slopes.
  45. § 816.111 Revegetation: General requirements.
  46. § 816.113 Revegetation: Timing.
  47. § 816.114 Revegetation: Mulching and other soil stabilizing practices.
  48. § 816.116 Revegetation: Standards for success.
  49. § 816.131 Cessation of operations: Temporary.
  50. § 816.132 Cessation of operations: Permanent.
  51. § 816.133 Postmining land use.
  52. § 816.150 Roads: general.
  53. § 816.151 Primary roads.
  54. § 816.180 Utility installations.
  55. § 816.181 Support facilities.
  56. § 816.200 Interpretative rules related to general performance standards.
Authority:
30 U.S.C. 1201 et seq.; and sec 115 of Pub. L. 98-146.
Source:
44 FR 15395, Mar. 13, 1979, unless otherwise noted.
Editorial Note:
At 82 FR 54979, Nov. 17, 2017, as required by the Congressional Review Act and Public Law 115-5, the Office of Surface Mining Reclamation and Enforcement removed all amendments to part 816 made effective on Jan. 19, 2017, at 81 FR 93392, Dec. 20, 2016.

The following state regulations pages link to this page.