(a) The following
federal requirements are adopted by reference:
(1) 21 C.F.R. Part
110 (current good
manufacturing practice in manufacturing, packing, or holding human food),
revised as of April 1, 2015;
(2) 21
C.F.R, Part
129 (processing and bottling of bottled drinking water), revised as
of April 1, 2015;
(3)21 C.F.R.
165,
110 (bottled water), revised as of April 1,2015;
(4) 40 C.F.R. Part
136, Appendix B
(definition and procedure for the determination of the method detection limit,
Revision 1. H), revised as of July 1, 2015;
(5) the following provisions from 40 C.F.R.
141.1 -141. 6 (Subpart A - general), revised as of July 1, 2015:
(A) the definitions of "Act," "action level,"
"bag filters," "bank filtration," "cartridge filters," "clean compliance
history," "comprehensive performance evaluation (CPE)," "combined distribution
system," "consecutive system," "corrosion inhibitor," "disinfection profile,"
"dose equivalent," "dual sample sets," "effective corrosion inhibitor
residual," "enhanced coagulation," "enhanced softening," "filter profile,"
"finished water," "first draw sample," "flowing stream," "GACIO," "GAC20,"
"ground water under the direct influence of surface water (GWUDi)," "haloacetic
acids (five) (HAA5)," "halogen," "initial compliance period," "lake/reservoir,"
"large water system," "lead service line,"
"Legionella,"
"Level 1 assessment," Level 2 assessment," "locational running annual
average," "man-made beta particle and photon emitters," "medium-size water
system," "membrane filtration," "optimal corrosion control treatment,"
"picocurie," "plant intake," "point of disinfectant application,"
"presedimentation," "rem," "sanitary defect," "seasonal system," "service line
sample," "single family structure," "small water system," "standard sample,"
"Subpart H systems," "supplier of water," "SUVA," "system with a single service
connection," "total organic carbon (TOC)," "total trihalomethanes (TTHIVI),"
"trihalomethane (THM)," "two-stage lime softening," "uncovered finished water
storage facility," and "wholesale system," as set out in
40 C.F.R.
141.2(definitions);
(C)
40 C.F.R.
141.4(a) (variances and
exemptions), including the Note to paragraph (a);
(6) the following provisions from
40 C.F.R.
141.21 -
141.29 (Subpart C -monitoring and
analytical requirements), revised as of July 1, 2015:
(A)
40C.F.R.
141.21 (coliform sampling);
(B)
40 C.F.R.
141.22(b) (turbidity
sampling and analytical requirements);
(C)
40 C.F.R.
141.23 (inorganic chemical .sampling and
analytical requirements);
(D)
40 C.F.R.
141.24 (organic chemicals, sampling and
analytical requirements);
(E)
40 C.F.R.
141.25 (analytical methods for
radioactivity);
(F)
40 C.F.R.
141.26 (monitoring frequency and compliance
requirements for radionuclides in community water systems);
(G)
40 C.F.R.
141.27 (alternative analytical
techniques);
(H)
40 C.F.R.
141.28 (certified laboratories);
(I)
40C.F.R.
141.29 (monitoring of consecutive public
water systems);
(J) Appendix A to
40 C.F.R. Part
141, Subpart C (alternative testing methods approved for
analysis under the Safe Drinking Water Act);
(7) the following provisions from 40 C.F.R.
141.31 -141. 35 (Subpart D -reporting and recordkeeping), revised as of July 1,
2015:
(B)
40 C.F.R.
141.33 (record maintenance);
(C)
40C.F.R.
141.35 (reporting for unregulated contaminant
monitoring results), except that the term "you" means the owner or
operator;
(8) the
following provisions from 40
C.F.R.
141.40 -
141.43 (Subpart E ~ special
regulations, including monitoring regulations and prohibition on lead use),
revised as of July 1, 2015:
(A)
40 C.F.R.
141.40 (monitoring requirements for
unregulated contaminants), except that the term "you" means the owner or
operator;
(B)
40 C.F.R.
141.41 (special monitoring for
sodium);
(C)
40 C.F.R.
141.42 (special monitoring for corrosivity
characteristics);
(9)
the following provisions from
40 C.F.R.
141.50 -
141.55 (Subpart F -maximum
contaminant level goals and maximum residual disinfectant level goals), revised
as of July 1,2015:
(A)
40 C.F.R.
141.51(b) (maximum
contaminant level goals for inorganic contaminants);
(B)
40 C.F.R,
141.55 (maximum contaminant level goals for
radionuclides);
(10) the
following provisions from 40 CRR. 141.60-141.66 (Subpart G-national primary
drinking water regulations: maximum contaminant levels and maximum residual
disinfectant levels), revised as of July 1, 2015;
(A)
40C.F.R.
141.61 (maximum contaminant levels for
organic contaminants);
(B)40C.F,R,
141.62 (maximum contaminant levels for inorganic contaminants);
(C)
40C.F.R.
141.63 (maximum contaminant levels (MCLs) for
microbiological contaminants);
(D)
40C.F.R.
141.64 (maximum contaminant levels for
disinfection byproducts);
(E) 40
C.F.R.
141,
65 (maximum residual disinfectant levels);
(F)
40 C.F.R.
141.66 (maximum contaminant levels for
radionuclides);
(11) the
following provisions from 40 C.F.R.
141.70-141, 76 (Subpart H-filtration and
disinfection), revised as of July 1, 2015;
(A) 40 C.F.R.
141,
70 (general
requirements);
(B) 40CF.R. 141.71
(criteria for avoiding filtration);
(C) 40 C.F.R.
141,
72(disinfection);
(E)
40 C.F.R.
141.74 (analytical and monitoring
requirements), except that in 40 C.F. R.
141.74(b)(3), the phrase "must be
determined based on the CT
99.9 values in tables 1.1 -
1.6, 2.1, and 3,1 of this section, as appropriate" is revised to read
"may be determined based either on the
CT99.9 values in tables 1.1 -1,6,2,1, and 3.1 of this
section, as appropriate, or on the formula for calculating CT values set out in
ISAAC 80.655(b)";
(F)
40C.F.R.
141.75 (reporting and recordkeeping
requirements);
(G) 40C.F.R. 14 L76
(recycle provisions);
(12) the following provisions from 40 C.F.R.
141.80 -141. 91 (Subpart I - control of lead and copper), revised as of July 1,
2015:
(A)
40 C.F.R.
141.80 (general requirements);
(B)
40 C.F.R.
141.81 (applicability of corrosion control
treatment steps to small, medium-size and large water systems);
(C)
40 C.F.R.
141.82 (description of corrosion control
treatment requirements);
(D)
40 C.F.R.
141.83 (source water treatment
requirements);
(E)
40 C.F.R.
141.84 (lead service line replacement
requirements);
(F)
40 C.F.R.
141.85 (public education and supplemental
monitoring requirements);
(G)
40 C.F.R.
141.86 (monitoring requirements for lead and
copper in tap water);
(H) 40 CF.R.
141,
87 (monitoring requirements for water quality parameters);
(I)
40 C.F.R.
141.88 (monitoring requirements for lead and
copper in source water);
(J)
40 C.F.R.
141.89 (analytical methods);
(K)
40C.F.R.
141.90 (reporting requirements);
(L) 40C.F.R. 141, 91 (recordkeeping
requirements);
(13) the
following provisions from 40 C.F.R,
141.130 -141. 135 (SubpartL-disinfectant
residuals, disinfection byproducts, and disinfection byproduct precursors),
revised as of July 1,2015:
(A)
40 C.F.R.
141.130 (general requirements);
(B)
40 C.F.R.
141.131 (analytical requirements);
(C)
40 C.F.R.
141.132 (monitoring requirements);
(D)40 C.F.R.
141,
133 (compliance
requirements);
(E)
40 C.F.R.
141.134 (reporting and recordkeeping
requirements);
(F)
40 C.F.R.
141.135 (treatment technique for control of
disinfection byproduct (DBP) precursors);
(14) the following provisions from
40 C.F.R.
141.151 -
141.155 (Subpart O -consumer
confidence reports), revised as of July 1, 2015:
(A)
40 C.F.R.
141.151 (purpose and applicability of this
subpart);
(C)
40 C.F.R.
141.153 (content of the reports);
(D)
40 C.F.R.
141.154 (required additional health
information);
(E)
40C.F.R.
141.155 (report delivery and
recordkeeping);
(F) Appendix A to
40 C.F.R. Part
141, Subpart O (regulated contaminants);
(15) the following provisions from 40 CF.R.
141.170-
141.175 (SubpartP-enhanced filtration and disinfection -systems
serving 10,000 or more people), revised as of
July 1,2015:
(A) 40 CF.R.
141.170 (general
requirements);
(B) 40 CF.R.
141.171
(criteria for avoiding filtration);
(C) 40 CF.R.
141.172 (disinfection profiling
and benchmarking);
(E) 40 CF.R.
141,
174 (filtration sampling requirements);
(F) 40 CF.R.
141.175 (reporting and
recordkeeping requirements);
(16) the following provisions from 40 CF.R.
141,
201 -
141.211 (Subpart Q-public notification of drinking water violations),
revised as of July 1, 2015:
(A) 40 CF.R.
141.201 (general public notification requirements);
(B) 40 CF.R.
141.202 (Tier 1 public notice -
form, manner, and frequency of notice);
(C) 40 CF.R.
141.203 (Tier 2 public notice -
form, manner, and frequency of notice);
(D) 40 CF.R.
141.204 (Tier 3 public notice -
form, manner, and frequency of notice);
(E)
40 C.F.R.
141.205 (content of the public
notice);
(F) 40 CF.R.
141.206
(notice to new billing units or new customers);
(G) 40 CF.R.
141.207 (special notice of the
availability of unregulated contaminant monitoring results);
(H) 40 C.F.R.
141 .208 (special notice for
exceedance of the SMCL for fluoride);
(I)
40C.F.R.
141.210 (notice by primacy agency on behalf
of the public water system);
(J)
40C.F.R,141, 211 (special notice for repeated failure to conduct monitoring of
the source water for Cryptosporidium and for failure to
determine bin classification of mean Cryptosporidium
level).
(K) Appendix A to
40 C.F.R. Part
141, Subpart Q (NPDWR violations and other situations requiring
public notice);
(L) Appendix B to
40 C.F.R, Part
141, Subpart Q (standard health effects language for public
notification);
(M) Appendix C to 40
C.F.R, Part
141, Subpart Q (list of acronyms used in public notification
regulation);
(17) the
following provisions from 40 C,F,R, 141, 400 - 141.405 (Subpart S -ground water
rule), revised as of July 1, 2015;
(A)
40 C.F.R.
141.400 (general requirements and
applicability);
(B)
40 C.F.R.
141.401 (sanitary surveys for ground water
systems);
(C)
40 C.F.R.
141.402 (ground water source microbial
monitoring and analytical methods);
(D)
40 C.F.R.
141.403 (treatment technique requirements for
ground water systems);
(E)
40 C.F.R.
141.404 (treatment technique violations for
ground water systems);
(F)
40 C.F.R.
141.405 (reporting and recordkeeping for
ground water systems);
(18) the following provisions from
40 C.F.R.
141.500 -
141.571 (Subpart T -enlianced
filtration and disinfection - systems serving fewer than 10,000 people),
revised as of July 1, 2015, except that the term "administrator" means
"department":
(A)
40 C.F.R.
141.500 (general requirements);
(B)
40 C.F.R.
141.501 (Who is subject to the requirements
of Subpart T?);
(C)
40 C.F.R.
141.502 (When must my system comply with
these requirements?), except that the phrase "January 1, 2005" is revised to
read "August 19, 2006";
(D)
40 C.F.R,
141.503 (What does Subpart T
require?)
(E)
40 C.F.R.
141.510 (Is my system subject to the new
finished water reservoir requirements?);
(F)
40 C.F.R.
141.511 (What is required of new finished
water reservoirs?);
(G)
40 C.F.R.
141.520 (Is my system subject to the updated
watershed control requirements?);
(H)
40C.F.R.
141.521 (What updated watershed control
requirements must my unfiltered system implement to continue to avoid
filtration?);
(I)
40 C.F.R.
141.522 (How does the state determine whether
my system's watershed control requirements are adequate?);
(J)
40 C.F.R.
141.530 (What is a disinfection profile and
who must develop one?);
(K)
40 C.F.R.
141.531 (What criteria must a state use to
determine that a profile is unnecessary?);
(L)
40 C.F.R.
141.532 (How does my system develop a
disinfection profile and when must it begin?);
(M)
40 C.F.R.
141.533 (What data must my system collect to
calculate a disinfection profile?);
(N)
40 C.F.R.
141.534 (How does my system use this data to
calculate an inactivation ratio?);
(O)
40 C.F.R.
141.535 (What if my system uses chloramines,
ozone, or chlorine dioxide for primary disinfection?);
(P)
40 C.F.R.
141.536 (My system has developed an
inactivation ratio; what must we do now?);
(Q)
40 C.F.R.
141.540 (Who has to develop a disinfection
benchmark?);
(R)
40 C.F.R.
141.541 (What are significant changes to
disinfection practice?);
(S)
40 C.F.R,
141.542 (What must my system do if we are
considering a significant change to disinfection practices?);
(T)
40 C.F.R.
141.543 (How is the disinfection benchmark
calculated?);
(U)
40 C.F.R.
141.544 (What if my system uses chloramines,
ozone, or chlorine dioxide for primary disinfection?);
(V)
40C.F.R.
141.550 (Is my system required to meet
Subpart T combined filter effluent turbidity limits?);
(W)
40 C.F.R.
141.551 (What strengthened combined filter
effluent turbidity limits must my system meet?);
(X)
40 C.F.R.
141.552 (My system consists of "alternative
filtration" and is required to conduct a demonstration - what is required of my
system and how does the state establish my turbidity limits?);
(Y)
40 C.F.R.
141.553 (My system practices lime softening -
is there any special provision regarding my combined filter
effluent?);
(Z)40C,F.R. 141.560 (Is
my system subject to individual filter turbidity requirements?);
(AA)40C,F,R, 141.561 (What happens if my
system's turbidity monitoring equipment fails?);
(BB)40 C.F.R.
141,
562 (My system only has
two or fewer filters - is there any special provision regarding individual
filter turbidity monitoring?);
(CC)
40 C.F.R,
141.563 (What follow-up action is my system
required to take based on continuous turbidity monitoring?);
(DD)
40 C.F.R.
141.564 (My system practices lime softening -
is there any special provision regarding my individual filter turbidity
monitoring?);
(EE)
40 C.F.R.
141.570 (What does Subpart T require that my
system report to the state?);
(FF)
40 C.F.R.
141.571 (What records does Subpart T require
my system to keep?);
(19) the following provisions from
40
C.F.R.
141.600 -
141.605 (Subpart U -initial
distribution system evaluations), revised as of July 1, 2015, except that the
term "you" means the owner or operator:
(A)
40C.F.R.
141.600 (general requirements);
(B) 40C.RR. 141.601 (standard
monitoring);
(C)
40 C.F.R.
141.602 (system specific studies);
(D)
40 C.F.R.
141.603 (40/30 certification);
(E)
40 C.F.R.
141.604 (very small system
waivers);
(F)
40 C.F.R.
141.605 (Subpart V compliance monitoring
location recommendations);
(20) the following provisions from
40
C.F.R.
141.620 - 341.629 (Subpart V -Stage 2
disinfection byproducts requirements), revised as of July 1, 2015, except that
the term "you" means the owner or operator:
(A)
40 C.F.R.
141.620 (general requirements);
(B)
40 C.F.R.
141.621 (routine monitoring);
(C)
40 C.F.R.
141.622 (Subpart V monitoring
plan);
(D) 40C,RR. 141.623 (reduced
monitoring);
(E)
40 C.F.R.
141.624 (additional requirements for
consecutive systems);
(F)
40 C.F.R.
141.625 (conditions requiring increased
monitoring);
(G)
40 C.F.R.
141.626 (operational evaluation
levels);
(H)
40 C.F.R.
141.627 (requirements for remaining on
reduced TTHM and HAA5 monitoring based on Subpart L results);
(I)
40 C.F.R.
141.628 (requirements for remaining on
increased TTHM and HAA5 monitoring based on Subpart L results);
(J)
40 C.F.R.
141.629 (reporting and recordkeeping
requirements);
(21) the
following provisions from 40 CF.R.
141.700-
141.723 (Subpart W-enhanced
treatment for
Cryptosporidium), revised as of July 1, 2015:
(A)
40 C.F.R.
141.700 (general requirements);
(B)
40 C.F.R.
141.701 (source water monitoring);
(C)
40 C.F.R.
141.702 (sampling schedules);
(D)
40 C.F.R.
141.703 (sampling locations);
(E)
40 C.F.R.
141.704 (analytical methods);
(F)
40 C.F.R.
141.705 (approved laboratories);
(G) 40 CF.R.
141.706 (reporting source water
monitoring results);
(H)
40 C.F.R.
141.707 (grandfathering previously collected
data);
(I)
40 C.F.R,
141.708 (requirements when making a
significant change in disinfection practice);
(J)
40 C.F.R.
141.709 (developing the disinfection profile
and benchmark);
(K)
40 C.F.R.
141.710 (bin classification for filtered
systems);
(L)
40 C.F.R.
141.711 (filtered system additional
Cryptosporidium treatment requirements);
(M)
40 C.F.R.
141.712 (unfiltered system
Cryptosporidium treatment requirements);
(N)
40 C.F.R.
141.713 (schedule for compliance with
Cryptosporidium treatment requirements);
(O)
40 C.F.R.
141.714 (requirements for uncovered finished
water storage facilities);
(P) 40
CF.R,
141.715 (microbial toolbox options for meeting
Cryptosporidium treatment requirements);
(Q)
40 C.F.R.
141.716 (source toolbox
components);
(R)
40 C.F.R.
141.717 (pre-filtration treatment toolbox
components);
(S)
40 C.F.R.
141.718 (treatment performance toolbox
components);
(T)
40 C.F.R.
141.719 (additional filtration toolbox
components);
(U)
40 C.F.R.
141.720 (inactivation toolbox
components);
(V)
40 C.F.R.
141.721 (reporting requirements);
(W)
40 C.F.R.
141.722 (recordkeeping
requirements);
(X)
40 C.F.R.
141.723 (requirements to respond to
significant deficiencies identified in sanitary surveys performed by
EPA);
(22) the following
provisions from 40 C.F.R.
141.851 -
141.861 (Subpart Y - revised total
coliform rule), revised as of July 1, 2015:
(B)
40 C.F.R.
141.852 (analytical methods and laboratory
certification);
(C)
40 C.F.R.
141.853 (general monitoring requirements for
all public water systems);
(D)
40 C.F.R.
141.854 (routine monitoring requirements for
non-community water systems serving 1,000 or fewer people using only ground
water), except 40 C.F.R.
141.854(d), (e), and (h) are
not adopted;
(E)
40 C.F.R.
141.855 (routine monitoring requirements for
community water systems serving 1,000 or fewer people using only ground water),
except 40 C.F.R.
141.855(d) is not adopted,
and in 40 C.F.R.
141.855(e), the phrase
"until it meets the reduced monitoring requirements in paragraph (d) of this
section" is not adopted;
(F)
40 C.F.R.
141.856 (routine monitoring requirements for
subpart H public water systems of this part serving 1,000 or fewer
people);
(G)
40 C.F.R.
141.857 (routine monitoring requirements for
public water systems of this part serving more than 1,000 people);
(H)
40 C.F.R.
141.858 (repeat monitoring and£.
coli requirements)
(I) 40 C.F.R.
141.B59 (coliform treatment
technique triggers and assessment requirements for protection against potential
fecal contamination);
(J) 40 C.F.R.
141,
860 (violations);
(23) the following provisions from
40 C.F.R.
142.16, revised as of July 1, 2015:
(A) 40 C.F.R.
142.16(b)(3)(i) (sanitary
survey) for surface water systems, including GWUDISW systems;
(B)
40 C.F.R.
142.16(o)(2)(i) (state
practices or procedures for sanitary surveys) for groundwater
systems;
(24) the
following provisions from 40
C.F.R.
142.20 -
142.24 (Subpart C -review of
state-issued variances and exemptions), revised as of July 1, 2015;
(A)
40 C.F.R.
142.20 (state-issued variances and exemptions
under Section 1415(a) and Section 1416 of the Act);
(B)
40 C.F.R.
142.21 (state consideration of a variance or
exemption request);
(25)
the following provisions from 40 C.F.R,
142,
40-142.46
(Subpart E -variances issued by the administrator under Section 1415(a) of the
Act), revised as of July 1, 2015, except that the term "administrator" means
"department":
(A)
40 C.F.R,
142.40 (requirements for a
variance);
(B)
40 C.F.R.
142.41 (variance request);
(C)
40 C.F.R.
142.42 (consideration of a variance
request);
(D)
40 C.F.R.
142.43 (disposition of a variance
request);
(E)
40 C.F.R.
142.44 (public hearings on variances and
schedules);
(F)
40 C.F.R.
142.45 (action after hearing);
(G)
40 C.F.R.
142.46 (alternative treatment
techniques);
(26) the
following provisions from 40 C.F.R.
142.50 -142. 57 (Subpart F -exemptions
issued by the administrator), revised as of July 1, 2015, except that the term
"administrator" means "department":
(A)
40 C.F.R.
142.50 (requirements for an
exemption);
(B)
40 C.F.R.
142.51 (exemption request);
(C)
40 C.F.R.
142.52 (consideration of an exemption
request);
(D)
40 C.F.R.
142.53 (disposition of an exemption
request);
(E)
40 C.F.R.
142.54 (public hearings on exemption
schedules);
(F) 40CF.R. 142.55
(final schedule);
(G)
40 C.F.R.
142.56 (extension of date for
compliance);
(H)
40 C.F.R.
142.57 (bottled water, point-of-use, and
point-of-entry devices);
(27) the following provisions from 40 C.F.R.
142.60 -142. 65 (Subpart G -identification of best technology, treatment
techniques or other means generally available), revised as of July 1, 2015:
(A)
40 C.F.R.
142.60 (variances from the maximum
contaminant level for total trihalomethanes);
(B)
40 C.F.R.
142.61 (variances from the maximum
contaminant level for fluoride);
(C)40 C.F-R. 142.62 (variances and exemptions
from the maximum contaminant levels for organic and inorganic
chemicals);
(D)
40 C.F.R.
142.65 (variances and exemptions from the
maximum contaminant levels for radionuclides);
(28) the following provisions from 40 C.F.R.
142.301 -142. 313 (Subpart K -variances for small system), revised as of July
1, 2015, except that the term "administrator" means "department":
(A)
40 C.F.R.
142.301 (What is a small system variance?);
however, the last sentence of
40 C.F.R,
142.301 is not adopted;
(B)
40 C.F.R.
142.302(a) (Who can issue a
small system variance?);
(C)
40 C.F.R.
142.303 (Which size public water systems can
receive a small system variance?);
(D)
40 C.F.R.
142.304 (For which of the regulatory
requirements is a small system variance available?);
(E)
40 C.F.R.
142.305 (When can a small system variance be
granted by a state?);
(F)
40 C.F.R.
142.306 (What are the responsibilities of the
public water system, state and the administrator in ensuring that sufficient
information is available and for evaluation of a small system variance
application?);
(G)
40 C.F.R.
142.307 (What terms and conditions must be
included in a small system variance?);
(H) 40 CF.R,
142.308 (What public notice is
required before a state or the administrator proposes to issue a small system
variance?); however, in 40 C.F.R.
142,
308(b), the phrase "the State equivalent
to the Federal Register or" is not adopted;
(I)
40 C.F.R.
142.309 (What are the public meeting
requirements associated with the proposal of a small system
variance?);
(J)
40 C.F.R.
142.310(a) (How can a person
served by the public water system obtain EPA review of a state proposed small
system variance?);
(29)
40 CF.R.
143.3 (national secondary drinking water regulations - secondary
maximum contaminant levels), revised as of July 1, 2015;
(30)
40 C.F.R.
143.4 (national secondary drinking water
regulations -monitoring), revised as of July 1,2015.
(b) The following publications are adopted by
reference:
(1) ANSI/AWWA Standard A100-06,
Water Wells, and Appendix H to ANSI/AWWA Standard A100-06
(Decommissioning of Test Holes, Partially Completed Wells, and Abandoned
Completed Wells), in effect as of August 1, 2006, American Water Works
Association; appendices to ANSI/AWWA Standard A100-06 other than Appendix H are
not adopted;
(2) ANSI/AWWA Standard
C510-07, Double Check Valve Backflow Prevention Assembly, in
effect as of October 1, 2008, American Water Works Association;
(3) ANSI/AWWA Standard C511-07,
Reduced-Pressure Principle Backflow Prevention Assembly, in
effect as of October 1, 2008, American Water Works Association;
(4) ANSI/AWWA Standard C600-10,
Installation of Ductile-Iron Water Mains and Their Appurtenances,
in effect as of November 1, 2010, American Water Works
Association;
(5) American Society
for Testing and Materials (ASTM) International Method D1293-12,Standard
Test Methods for pH of Water, revised as of January 1, 2012, American
Society for Testing and Materials International;
(6)
Manual for the Certification of
Laboratories Analyzing Drinking Water: Criteria and Procedures, Quality
Assurance, EPA 815-R-05-004, 5th edition,
January 2005, United States Environmental Protection Agency, except that
Section 14.4 (Procedures for Revocation) on page III-8 is not adopted; and
Supplement 1 to the Fifth Edition of the Manual for the Certification
of Laboratories Analyzing Drinking Water, EPA 815-F-08-006, June 2008,
United States Environmental Protection Agency;
(7)
Methods for Chemical Analysis of
Water and Wastes, Methods 150.1 and 150.2, EPA 600/4-79-020, March
1983, United States Environmental Protection Agency;
(8)
NSF Listings: Drinking Water
Treatment Chemicals and System Components - Health Effects, revised as
of April 20, 2005, NSF International;
(9)
NSF/ANSI Standard 60: Drinking
Water Treatment Chemicals - Health Effects, revised as of August 22,
2012, NSF International;
(10)
NSF/ANSI Standard 61: Drinking Water System Components - Health
Effects, revised as of July 8, 2012, NSF International; and
NSF/ANSI Standard 61: Drinking Water System Components- Health Effects,
Addendum, published March 26, 2013, NSF International;
(11)
Standard Methods for the
Examination of Water and Wastewater, American Public Health
Association, American Water Works Association, and Water Environment
Federation, 22nd edition 2012, American Public Health Association;
(12) repealed 4/24/2009;
(13)
Guidance Manual for Conducting
Sanitary Surveys of Public Water Systems; Surface Water and Ground Water Under
the Direct Influence (GWUDI), Chapter 3, EPA 815-R-99-016, April 1999,
United States Environmental Protection Agency;
(14)
NSF/ANSI Standard 53: Drinking
Water Treatment Units - Health Effects, revised as of December 5,
2012, NSF International;
(15)
ANSI/AWWA Standard C654-13,Disinfection of Wells, in effect as
of July 1, 2013, American Water Works Association;
(16)
Sanitary Survey Guidance Manual
for Ground Water Systems, Chapter 4, EPA 815-R-08-015, October 2008,
United States Environmental Protection Agency;
(17)
NSF/ANSI Standard 372: Drinking
Water System Components - Lead Content, published July 31, 2011, NSF
International.
(c) The
department will use the requirements of the state plumbing code, as developed
under AS
18.60.705, in evaluating plans submitted for
approval under this chapter.
(d) As
guidance for meeting the requirements of this chapter, the use of the
recommended principles, practices, designs, and design criteria, set out in the
following reference materials, is encouraged by the department:
(1) the department'sAlaska Water
Treatment Guidance Manual, March 29, 1994, also available through West
Virginia University, Drinking Water Clearinghouse;
(2) AWWA standards in effect as of April
2004;
(3)
Basics of a
Corrosion Control Study, Michelle M. Frey, Black &
Veatch;
(4)
Cold Regions
Utility Monograph, 1996, Canadian Society for Civil
Engineers;
(5)
Community
Water Systems Source Book, Joseph S. Ameen,
5th edition 1984, Technical Proceedings;
(6)
Consensus Method for Determining
Groundwater Under the Direct Influence of Surface Water Using Microscopic
Particulate Analysis (MPA), Jay Vasconcelos and Stephanie Harris, EPA
910/9-92-029, United States Environmental Protection Agency;
(7)
General Public Notification
Handbook for Public Drinking Water Suppliers, EPA 507/9-89-002,
September 1989, United States Environmental Protection Agency;
(8)
Glossary - Water and Wastewater
Control Engineering, Joint Editorial Board, American Public Health
Association, American Society of Civil Engineers, American Water Works
Association, and Water Pollution Control Federation; 3rd edition 1981, Water
Pollution Control Federation;
(9)
Groundwater and Wells, Fletcher G. Driscoll, 1986, Mower
House;
(10)
Guidance Manual
for Compliance with the Filtration and Disinfection Requirements for Public
Water Systems Using Surface Water Sources, March 1991, United States
Environmental Protection Agency;
(11)
Lead and Copper Rule Guidance
Manual, Corrosion Control Treatment, EPA B-92-002, United States
Environmental Protection Agency, also available from West Virginia University,
Drinking Water Clearinghouse;
(12)
Recommended Standards for Water Works, Great Lakes-Upper
Mississippi River Board of State and Provincial Public Health and Environmental
Managers, April 2003 edition, Health Research Inc., Health Education Services
Division;
(13)
State
Alternative Technology Approval Protocol, 1996, Association of State
Drinking Water Administrators;
(14)
Treatment Process Selection for Particle Removal, 1997,
American Water Works Association;
(15)
Water Quality and Treatment,
4th edition 1990, American Water Works Association;
(16)
Water Treatment Plant Design,
American Society of Civil Engineers & American Water Works
Association, 1998, McGraw-Hill, Inc.;
(17)
Water Treatment: Principles and
Design, James M. Montgomery Consulting Engineers, 1985, John Wiley
& Sons.